Recommended Wet Bolt for 2 Inch Wide Equalizer Slipper Springs
Updated 03/28/2023 | Published 03/27/2023 >
Products Featured in This Question
Question:
i was wondering if you had a part# for the push in sleeve that goes into the welded bushing on part# e4541?
asked by: John L
0
Expert Reply:
We do not have a part number for a push in sleeve on the Equalizer for 2" Wide Slipper Springs item # E4541-Z because it is not made for one. This equalizer uses wet bolts like item # TRFA71063 which you then fill up with grease.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole - Zinc Plated
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 12 Inch Long
- Tandem Axle
- Triple Axle
- Redline
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: equalizer
- Search Results: bushing
- Search Results: axle flip kit
- Shop: 5-Leaf Slipper Spring for 7,000-lb Trailer Axles - 26-1/2" Long - EMCO
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole - Zinc Plated
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: CE Smith Shackle Bolts with Lock Nuts - 3-1/2" Long - Qty 2
- Shop: 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long
- Shop: Trailer Hitch
- Search Results: 23~411
- Search Results: e4541~z
- Search Results: 13~44
- Q&A: Replacement Dexter Axle Disc Brake Calipers that have 89-5 Stamped on Them
- Video: What to Know About the Equalizer for 2" Wide Slipper Springs
- Q&A: What Is The Difference Between Center Hangers TRHG291-C and 29-1?
- Shop: Trailer Wiring
- Q&A: Replacement Hub and Drum assembly for ALKO 8480
- Q&A: Brake Assembly Replacement Recommendation for Al-KO 7k Trailer Axles
- Shop: RV Power Cord
- Shop: RV Electrical
- Q&A: Replacement Grease Seal for Trailer Hub that is Marked 171255
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Suspension Enhancement For A Trailer With 8,000 Pound Axles
- Q&A: Recommended Replacement Cylinder Kit for a Dexter Hydraulic Drum Brake Kit
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

