Feature Breakdown: Wet Equalizer Bolt with Castle Nut and Grease Zerk Video

Having the slightly larger main feed line of 1/4 inch is a a great idea for plumbing up your triple axle trailer. We have the HydraStar kit part #HS496-153 which is designed for that. This kit uses 1/4 for the main feed line to the first tee fitting…

It really depends on the springs used. Take a look at the picture I have included that shows hanger spacing based on several different springs. This will be a good guide to reference when mocking up the suspension on your trailer. This is also found…

I have another option for you but there is not a screw on spindle available for the #8327872 you were looking at. To replace one of the spindles on the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs #8327872…

The #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles #TRU39FR is the same size as that used on the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles #8327860. Both will fit the same Dexter Trailer Hub and Drum…

You will actually just need kit #APT6SE-36 which is the same thing only the equalizers in it are 13-1/8 inches long. The hardware with each is specific to the kits so some of the other parts are different but for 2 inch slipper springs and 13-1/8…

It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5 on…

The torque requirements for leaf spring u-bolts depend on the diameter of the u-bolts that are being used. If the gross weight of your tandem axle trailer is 7,000 lbs, then you likely have two 3,500 lb axles. Typically 1/2 inch diameter u-bolts are…

The Spring-Eye Bolt with Locknut for Slipper Springs #166079 is a total of 3-1/2" long. The measurement from the back of the head to the start of the threads is 2-3/4" and the length of the threads are 3/4".

Yes, the leaf spring part #e74SR would work great on a tandem axle 14k trailer like your PJ dump trailer. The equalizer part #TREQ4541 is the correct one to use as well with this spring and trailer. For wet bolts you'd need the part #TRFA71063…

The Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs part #126B2 has a grade 5 rating. There are three radial lines on the head of the bolt which indicates the rating.

The Nylon Bushings - 9/16" Inner Diameter, 3/4" Outer Diameter - 1-3/4" Long - Qty 6 #SP05-060 you were looking at are the only option for bushings in this size. While the 9/16" inner diameter is common, the 3/4" outer…

The term, wet, in this case means that the head of the bolt has a grease Zerk in it and there is a channel that leads to center of the bolt. This makes it easy to grease the bolt while installed, as you can put a grease gun right up to the Zerk and…