Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Andy, the Ventline Roof Vent part #V3092-603-00 does not include a garnish. You can pair this with either the Polar White #VA0445-33 or Birch White #VA0445-25 ceiling garnish which is designed to fit roofs 7/8" to 2" thick. How thick is…
view full answer...According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
view full answer...Hey Pete, yes all of the bolts that come with the Dexter Heavy Duty Suspension Hanger Kit part #K71-449-00 are wet bolts and have zerk fittings. The shackles are wider at 1/2 inch which the bolts that come with this kit are long enough to…
view full answer...Hey Cody. The longest zinc plated shackle bolt we have is the Replacement Wet Shoulder Bolt item #MR52HR. It measures 9/16" x 3-3/8". They're sold as part of a kit with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers item…
view full answer...The MORryde X-Factor Crossmember uses 2 of the Wet Shoulder Bolts #MR52HR. I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 with these bolts. This grease is formulated to work well in both hot and cold climates. It is also…
view full answer...I do have an option for you. While we do not have the exact ones from MORryde available by themselves, you can use the Replacement Wet Shoulder Bolt #LC126197 as a replacement for the longer wet bolts in the kit that comes with the MORryde X-Factor…
view full answer...Thank you so much for the purchases! To start, the answer to your first question is yes, all the bolts will indeed fit without any issue. Then as for additional bolts, there are no additional wet bolts needed or recommended to go along with the…
view full answer...Hi Shane; sometimes the adapter module #HBA-CAM is needed to help the brakes function properly. However, before you go this route I would check out the brake controller. More often than not you need to switch to electric over hydraulic mode for the…
view full answer...Hey Steve, there isn't a way to use a middle X-factor with a Roadmaster comfort ride system unfortunately.
view full answer...Hey Mike, so MORryde does strongly recommend using bronze bushings with their X-Factor brace. Nylon just wears out quicker. Do you have the older 2 inch wide springs or the 1-3/4 inch wide springs?
view full answer...Since you have Dexter 7k axles, the only thing you will need is the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers item #RM-2460-2570. This is by far the best suspension upgrade you can do to your trailer. The benefit of this…
view full answer...Hey Andy, since the Comfort Ride comes in 5k and 7k options and your will have 6k axles you'd want to go with the slightly higher 7k option part #RM-2460-2570 as it would be best to have a little more suspension capacity than not enough and be…
view full answer...