12" Equalizer Kit for Trailer Leaf Springs

Question

Question:

Do you make the dual axle stabilizer kit with 12” spacing as opposed to 13 1/8”? Thanks

asked by: Lucas D

0

Expert Reply:

Hey Lucas, thanks for reaching out!

We have the Equalizer for 2" Wide Slipper Springs # TREQ4541 that looks to match the description you're needing, but this doesn't come in a full-fledged kit because it's from a different manufacturer.

To get the rest of the bolts you'll need the following:

- Wet Equalizer Bolt with Castle Nut, Grease Zerk and Cotter Pin # 126A1 (qty 2)
- Spring Eye Bolt # 166079
- Keeper Bolt and Locknut # 7-7-6-11

Let me know if you have any other questions!

expert reply by: Jon G

0

Answer 1

Hi Ryan; I have attached a diagram below of the #TREQ1304 for your reference. Go ahead and compare these measurements to your current equalizer. If the distance between the holes lines up with yours this is what I would choose. The #APT6SE equalizer…

view full answer...

Answer 2

Hi Kat, Yes, for a 9/16" wheel stud I recommend the DeeMaxx Trailer Wheel Lug Nut #DE25GR. This lug nut fits 9/16" - 18 wheel studs. 18 threads per inch is pretty standard but if you wanted to go the extra mile to make sure they fit you can…

view full answer...

Answer 3

For a single piece, 9/16" lug nut for your trailer we offer the DeeMaxx Trailer Wheel Lug Nut #DE25GR.

view full answer...

Answer 4

The equalizer in the Tandem-Axle Trailer Equalizer Kit #AP216 is 11-1/2" on center from the outer spring mounting holes when measuring horizontal separation. One hole will be 6" on center from the equalizer mounting hole center and the…

view full answer...

Answer 5

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 9

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 10

Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…

view full answer...

12" Equalizer Kit for Trailer Leaf Springs

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching