bing tracking image
Q & A Icon

Kelvin Rating Of The Command Electronics 12v RV LED Puck Light # CE68ZR  

Updated 08/18/2025 | Published 03/23/2023

Question:

What is the Kelvin rating for the white led light? you say warm white - 3000K?

0

Expert Reply:

I spoke with the manufacturer, Command Electronics, about the 12V RV LED Puck Light # CE68ZR and found that it has a warm white - 3,500 kelvin rating.

expert reply by:
0
Kevin C
Lynda D. profile picture

Lynda D.

2/18/2025

How do we order the warm white 12v puck lights. I need these that have the 3 screw holes, not 4

Kevin C. profile picture
Etrailer Expert

Kevin C.

2/20/2025

@LyndaD We have a few warm white options, is there a specific diameter you need? The Command # 277-000489 is a warm white surface-mount puck light with 3 mounting holes spaced 2-7/8" apart center to center. It's 4-3/8" diameter so it's around the typical size for most trailers. If yours is a different diameter then let me know and I can look for the correct replacement.
Lynda D. profile picture

Lynda D.

2/20/2025

@KevinC That is the correct just want to be sure it isnt the cool white and has 3 screws not 4
Kevin C. profile picture
Etrailer Expert

Kevin C.

2/20/2025

@LyndaD Yes, it is a warm white and has three mounting holes. if you click on the link # 277-000489 there's pictures of base without the cover and you can see the light screwed into the ceiling. I've also attached an installation video I made for this light. You'll probably find the old light wired in using end cap wire connectors, which you can find at your local hardware store or you can use butt connectors # DW05714. If you need anything else just let me know and I'd be happy to help.
Ryan D. profile picture

Ryan D.

8/18/2025

Kevin, Do these lights have copper or aluminum wires? If they are aluminum, what’s the best way to connect these as it’s recommended to not connect copper and aluminum directly together due to corrosion.

Jameson C. profile picture
Etrailer Expert

Jameson C.

8/18/2025

@RyanD the wire core is aluminum. I'd use butt connectors that way they don't have to touch each other.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>