How To Find Correct Replacement Bearings for a 2003 Shorelandr Trailer
Updated 03/21/2023 | Published 03/20/2023
Question:
Hello I have a 2003 shore lander trailer and I am trying to find a bearing kit for it let me know what information you need from me.
asked by: Isaac
Expert Reply:
I have a few options for you to help with identifying the bearings on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100. The other option would be to take the hubs off the trailer and either read the part numbers off the old bearings or measure them with a dial caliper to the nearest thousandth of an inch. I have attached an article that goes over this process in more detail.
I have also attached a link with list of our bearing selection.
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Search Results: bearing l44649 and l68149 trailer bearings races seals caps
- Search Results: bearing l68149 trailer bearings races seals caps
- Search Results: l68149 / l44649 trailer hubs and drums
- Search Results: trailer bearings races seals caps
- Search Results: race l68149 and l68111 trailer bearings races seals caps
- Q&A: Best Solvent to Clean Old Grease Off Bearings
- Search Results: dexter hubs
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Installation of Castle Nut On Hub
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 7/16" Diameter - Zinc Plated
- Shop: Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter
- Shop: Lippert Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5" - Pre-Greased
- Shop: Lippert Trailer Idler Hub Assembly for 4,400-lb Axles - 6 on 5-1/2" - Pre-Greased
- Search Results: dexter idler hub
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Q&A: Are the L68111 and L68110 Races the Same
- Video: Review of Redline Trailer Brakes - BP06-120
- Video: All You Need to Know About the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Trailer Bearings Races Seals Caps
