Replacement Plastic Step Fenders For Trailer With Welded Fender Brackets and 24" Tall Wheels

Updated 03/13/2023 | Published 03/10/2023

Products Featured in This Question

Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)

(37)

$41.42

Question:

I need to replace my fenders and am not sure if I should go with the 13” or 14” plastic fenders. The attached pics can be referenced for the below dimensions. Because of the angle of the brackets - I need more info on your products to determine the best choice. A: 5 1/2” distance from frame to farthest point of bracket B: 6 1/8” width needed to cover brackets C: 21 1/2” distance between inner points of brackets D: 34 1/8” distance between farthest points of brackets E: 24” approx width of tire F: 4 3/4” top of frame/brackets to top of tire I’ve reviewed the pictures and dimensions previously posted for both the 13” and 14” models but am not sure which is best! Thank you for your assistance!

asked by: Jacob H

Expert Reply:

Based on your images and measurements which are a great help I recommend going with the Fulton Single Axle Trailer Fenders # F008584-2. Instead of using your included mounts I recommend cutting them off the frame as they are far to close to your tires and could cause issues for you down the road. You will be able to use the Brackets # PF1135-BKT-2 to secure the fenders to your frame. You will need 2 pairs of these brackets to mount on your frame. You will need to source the correct height U-Bolts for your frame locally to secure the mounting brackets.

expert reply by: Bud M