Mounting Bracket For Fulton Fender - 15" Wheel With Top & Side Steps

Question

Question:

Hello, I am looking at your Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 15 Wheels - Qty 2 Item # F008585-2. Can you send me the web page that would show the Mounting Hardware for these?

asked by: Gary M

0

Expert Reply:

Yes! The Fulton # F008585-2 is compatible with the Galvanized Steel, U-Shaped, Bolt-On Brackets # PF1135-BKT-2

I've attached a helpful image that details the distances between the holes on this bracket. FYI, these brackets are a universal product. There may be a need to drill another hole on the Fulton fender to get the bracket to mount correctly to it, but it will work. The fender is modifiable and new holes can be drilled with ease to fit the bracket to your fender and trailer.

expert reply by: Aaron A

0

click to enlarge

Answer 1

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

view full answer...

Answer 2

In cases where a VIN can no longer be found on the trailer itself (you can try also looking along the length of the trailer's frame, both outside and inside, and on the axle for an ID tag/sticker) and there isn't one on your title then your…

view full answer...

Answer 3

Based on your images and measurements which are a great help I recommend going with the Fulton Single Axle Trailer Fenders #F008584-2. Instead of using your included mounts I recommend cutting them off the frame as they are far to close to your tires…

view full answer...

Answer 4

I didn't receive any information about your boat trailer, but I can explain how we classify them for you, which hopefully will help you to decide which fenders you want to go with. If you're only looking to replace one fender, unfortunately…

view full answer...

Answer 5

The only white fenders we have that will fit your 15" wheels are the #PF11X35W-2. We also have reports that this was a match for a 2000 Escort boat trailer, so it is likely this is the same part. If you decide you only want to place the one…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Mounting Bracket For Fulton Fender - 15" Wheel With Top & Side Steps

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching