What Is The Inside Diameter Of The RoundBar Adapter Kit # Y04093 for Yakima BigCatch Saddles?

Question

Question:

What is the Inside Diameter of the product?

asked by: Mac F

0

Expert Reply:

The RoundBar Adapter Kit # Y04093 is designed to fit the Yakima RoundBar Crossbars # Y00409 which are 1-1/8" in diameter.

expert reply by: Bud M

0

Answer 1

I took a look at the website for the Right-On Ruff trailers and it specified that Yakima accessories will fit the crossbars of the Right-On Ruff Sport trailers. We do have a carrier that will work for you, although the Yakima Mako has been…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Kit, yes the Inno Shaper 100 Roof Cargo Basket #INXA569 that you referenced does fit the Inno aero crossbars you have currently. This was designed to attach to the top channels of crossbars which yours have so it would it and work great. What are…

view full answer...

Answer 7

The Mighty Mount 39H #Y03539 and 23H #Y03523 Accessory Adapters are pretty much the same thing and will be compatible with 3-1/8" wide x 1" tall crossbars. The biggest difference between these adapters is that the 39H is designed…

view full answer...

Answer 8

I do have an option for you but in order to convert a Yakima rooftop accessory from round bars to aero bars, you will need the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 which is what Yakima recommends. In regards to…

view full answer...

Answer 9

Forgive me but we do not carry ARB products so I am by no means an expert on them but I was able to get into contact with one of their reps and we were able to come up with a way for you to mount the ARB Awning 2000 on your Yakima Round Bar Roof…

view full answer...

Answer 10

If you check out the picture I attached you will see where I pointed out where the sticker is that has the VIN on the Yakima Rack and Roll trailers like the part #Y08106. If somehow the sticker is worn off or unreadable my contact at Yakima said that…

view full answer...

Answer 11

Hey there Ray; yes you can mix a cargo box and a bike rack on the Benton cargo rack system for 2" hitches #B42FR. This setup has a lot of versatility with 2 pairs of crossbars to support full-size accessories like cargo boxes, bike trays, and…

view full answer...

Answer 12

Hello Sal, thanks for reaching out. The Yakima Mighty Mount 23H Accessory Adapter #Y03523 is what I recommend for the factory crossbars on your 2025 Toyota RAV4. These adapters are made specifically for factory crossbars like those on your Toyota.…

view full answer...

What Is The Inside Diameter Of The RoundBar Adapter Kit # Y04093 for Yakima BigCatch Saddles?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching