Mounting Brackets to Fit ARB Awning  

I would be happy to! We have taken quite a few measurements of the brackets for the Mounting Kit for Rhino-Rack Batwing Awning item #RR25FJ. Pretty sure the spacing you're asking for is 1-3/8" but there are a lot of holes so I went…

I was able to get my hands on this Mounting Kit for Rhino-Rack Batwing and Foxwing Awnings #RR31103. I have attached a picture below with the dimensions you requested.

I attached a picture that has the dimensions of the brackets of the Mounting Kit for Rhino-Rack Batwing Awning #RR25FJ that you referenced.

On the portion of the Rhino Rack Awning Bracket part #RR31103 that you referenced that holds the awning the holes are 1-3/8 inches apart from left to right and 4-1/2 inches from front to back.

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

I went out to our warehouse to take a few measurements on the Rhino-Rack Mounting Kit for Batwing and Foxwing Awnings #RR31103. The brackets have an overall width of 2-3/8 inches. The shorter portion has a length of 3-3/4 inches down to where it…

I do not see that ARB offers a bracket kit for their awnings to fit on the Inno Square Bars #IN436L. They do have the Mounting Kit #RR31103 which is designed to bolt around a 1-1/8" round crossbar but the Inno Bars are 1-1/4" wide.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

Yes Todd, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL67PD will fit your 2023 Ford F-150 Tremor. These air bags have 5,000 lbs of load leveling capacity, an adjustable air pressure range of 5 to 100 PSI,…

The main difference between the Timbren Suspension Enhancement System #TFRTT1504E and the Timbren Rear Suspension Enhancement System #TFR1504E on your 2022 Ford F-150 is going to be the weight capacity and purpose the system is intended for. The…