Looking For Equalizer And Wet Bolt Upgrade Kit For 2022 Grand Design 2910BH
Updated 03/20/2025 | Published 03/13/2025
Products Featured in This Question
Question:
I have a 2022 Grand Design 2910BH. Im upgrading the equalizer to this Road Armor equalizer. At the same time i want to upgrade the shoulder bolt that mounts the equalizer to the frame hangar with a wet bolt, and i want to upgrade the shackle hangars to HD shackles with wet bolts. What length wet bolts do i need for both the frame hangar mount and the shackles? Thank you.
asked by: Aaron
Expert Reply:
Hello Aaron, thanks for reaching out. The best option for this will be one of the MORryde suspension upgrade kits. They come with HD shackles, wet bolts and brinze bushings.
I just need to know what length your current shackle straps are. There is no way to look this up so if you could please measure the length from center hole to center hole. They should be either 2-1/4" long or 3-1/8" long, and we have kits available in both sizes:
- MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps # MR46ZR
- MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps # MR76ZR
(click to enlarge)
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: trailer suspension parts
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: disc brake conversion
- Search Results: morryde trailer suspension parts
- Search Results: morryde equalizer
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 6K Trailer Axles
- Search Results: suspension kit
- Search Results: leaf springs
- Search Results: equalizer
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: TecNiq Low Profile Stop Tail Turn Light - 15.5" - Clear Lens
- Video: Review of CE Smith Trailer Suspension Parts - Spring Seat Typical 3500lb Trailer Axle - CES88WR
- Shop: MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Q&A: Recommended Upgrade For 6-1/16" Long Equalizer TREQ310
- Video: How to Install the Kodiak 6 on 5-1/2 Disc Brakes - 2020 Grand Design Reflection Fifth Wheel
- Video: Comprehensive Review: Kodiak Disc Brakes
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Article: Double-Eye Trailer Suspension System Review
- Video: MORryde Tandem Axle Trailers AllTrek 4000 Equalizers Review
- Q&A: Upgrading Suspension Equalizers On 2018 Prime Time Trace Air 275 Travel Trailer
- Video: Ultimate Overview of the etrailer Enclosed Trailer Transition Plate
- Video: A Closer Look at the Wet Equalizer Bolt with Castle Nut, Grease Zerk and Cotter Pin
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Q&A: Are Leaf Spring Measured When Loaded Or Unloaded?
- Q&A: Determining Which Replacement Leaf Spring For 2005 Forest River Flagstaff Popup Camper
Aaron
3/19/2025
Thanks Jesse. I measured my shackles and my stock equalizer this weekend. My shackles are 2 1/4 so I ordered that kit from MORryde. My stock equalizer had an 8 inch length from shackle bolt hole to shackle bolt hole so I also got the CRE3000 for 35 inch wheelbase so that I matched the 8 inch dimensions. One last question is do I need to buy an additional wet bolt to hang my new CRE 3000 equalizer from the frame hanger, or do I use one of the bolts from the shackle kit? I absolutely want to use a wet bolt to hang the equalizer from the frame. Thank you.