Can Bearing Buddy Grease Seal Sets Be Used With BTR EZ Lube Spindles?
Updated 02/14/2023 | Published 02/13/2023
Products Featured in This Question
Question:
Can I use Bearing Buddy spindle seal with stainless ring on an EZ-Lube spindle? Seams like if I pump grease through the Zerk fitting in the end, it will push grease outside of the seal because the stainless ring covers the hole by the seal.
asked by: Stuart
Expert Reply:
Since the Bearing Buddy Grease Seal Set # BB60005 will direct grease outside the hub you will not be able to use the EZ-Lube spindle. Instead you will need to use a set of the Bearing Buddy Bearing Protectors # BB1980A-SS to fill your hubs with grease. You will need to remove the grease zerk on the end of the spindle before installing the Bearing Buddy caps.
(click to enlarge)
Product Page this Question was Asked From
Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.38 Inch I.D.
- 1.98 Inch O.D.
- Bearing Buddy
more information >
Continue Researching
- Shop: Dexter DX7.5L A-60 Brake Actuator - Weld On - Drum - 2" Ball - Primed - 7,500 lbs
- Shop: BOLT brand vehicle and hitch locks
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Q&A: Replacement Actuator for UFP A-60 34044
- Q&A: How Are The Pins Removed On The Dexter DX7.5L A-60 Brake Actuator # DX63FR For Replacing Parts?
- Q&A: How to bleed the brakes on a surge brake actuator on boat trailer
- Q&A: Compatibility of Dexter DX99FR Inner Member for Disc Brake Actuator with Ranger Boat Trailer
- Search Results: bunk brackets
- Q&A: Replacement Trailer Bunk Brackets for a Escort Boat Trailer
- Video: Hands-On with the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards
- Shop: Replacement Inner Member for Dexter DX7.5L Actuator - Tandem Axle w/ Disc - 2" Ball - 7,500 lbs
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 20' Long
- Shop: Spindle Grease Seal Set for LM67048 Inner Bearing and 1.781 Bearing Buddy
- Shop: TorkLift's Universal License Plate Flip Down Kit - Bolt-On Bracket for Hitch Access
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: brake hose
- Search Results: dexter 010 060 00
- Search Results: wear sleeve
- Search Results: license plates and frames
- Search Results: license plates
- Search Results: 060~036~00
- Q&A: Correct Replacement for UFP A-60 or A-75 Brake Actuator
- Q&A: Recommended Conversion Kit for Disc Brakes On 7,000 Lb Dexter Axles
- Video: Breaking Down the CE Smith Bolster and Swivel Bracket Assembly
- Video: Review of the CE Smith Bolster and Swivel Bracket Assembly
- Video: Let’s Check Out the CE Smith U-Bolt
- Video: CE Smith Bolster and Swivel Bracket Assembly Spec Review
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
on Trailer Bearings Races Seals Caps
