Troubleshooting Lack Of Audio With A Furrion Vision S RV Camera System

Updated 02/13/2023 | Published 02/11/2023

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(718)

$450.25

Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System

(97)

$243.50

7-Way Vehicle Power Adapter for Furrion RV Observation Camera

(549)

$72.04

Digital Multimeter with 42" Long Test Leads - LED Display

(3)

$22.17

12V PWM Filter for RV Backup Camera Systems - Hardwire

(180)

$63.40

Question:

Hello I am trying to get the sound to work

asked by: Clint

Expert Reply:

I've spoken with Furrion in the past about audio issues with the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF and found that most of the time the voltage running to the camera is the issue. I recommend detaching the rear camera from the mount and using a multimeter # PT89ZR to see if you're actually getting 12 volts to the camera.

If not you have two options:

Option 1: By using the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera # FR87PR. This adapter will send a steady current to the camera allowing you to receive a signal to your monitor. The male end will plug into the 7-way on your 2019 Chevy Silverado and you'll plug your trailer into the female end of this adapter.

Option 2: By using the 12V PWM Filter for RV Backup Camera Systems # VGR64VR. This is a permanent fix that will just splice in-line right behind the camera and send a steady current to the camera to fixed the signal issues.

Of the two choices I personally recommend the # VGR64VR just because it's so easy to do and when it's done you don't have to do anything else. The # FR87PR would be one additional thing you'd have to do every time you want to tow your trailer.

If you are getting 12 volts to the camera then the monitor is most likely the issue and would need to be replaced with part # FR77FR.