Replacement Velcro Strip For a Roll Up Soft Tonneau Cover 1-3/8 Wide

Question

Question:

I have rugged liner rolling tonneau cover that I need to replace the velcro. The hook side strip has 1 1/8” velcro face, with a total width of 1 3/8”. It is a slide in style with screws at each end. Do you have a slide in strip that I could make fit?

asked by: Scott M

0

Expert Reply:

The Replacement TruXedo Shur-Bond Velcro # TX1115174 looks like the closest option we have to your width dimensions. This strip is 1-5/16" wide.

expert reply by: Bud M

0

Answer 1

I believe the part that you are looking for is the Replacement Adhesive Velcro Strip for Access Tonneau Covers #A20790 which measures 16' long x 1-1/4" wide. This also comes with alcohol wipes to ensure that you are installing it to a clean…

view full answer...

Answer 2

I have a solution for you, and the strips that you're referring to are going to come in a couple different sizes, but none of them are going to be 1-1/16" wide. The #TX1117876 strips you're referring to are 1" wide, which have the…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Your 2019 Chevy Silverado 1500 4x4 is flat towable as long as it has a two-speed transfer case that has a neutral and a 4-low setting. For a base plate kit you'd then want the part #RM-523199-5 to provide the attachment point for a tow bar to…

view full answer...

Answer 6

Hey Greg, we have anti-rattle devices that can be used with weight distribution shanks but the etrailer part #e38FV cannot be used with them. Instead you'd want the part #BX88224 which can be used with WD systems. Are you sure the sound you are…

view full answer...

Answer 7

To install a brake controller on your 2017 Chevrolet Silverado 1500 LT 4x4, you will just need the vehicle specific plug-in adapter. These adapters are usually brand specific. For example, if you go with the Tekonsha Prodigy P3 brake controller,…

view full answer...

Replacement Velcro Strip For a Roll Up Soft Tonneau Cover 1-3/8 Wide

Product Page this Question was Asked From

Continue Researching