Does 1999 Mercury Grand Marquis Need Converter For 4-Flat

Question

Question:

1999 Mercury Grand Marquis will i need a converter for my trailer wiring? or will a basic 4-flat suffice?

asked by: Stephen L

0

Expert Reply:

You will indeed need a 4-flat with a converter for your 1999 Mercury Grand Marquis, with the correct part being the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.

Then if you also need a hitch, the correct fit is the Trailer Hitch Receiver # e66AR.

expert reply by: Kyle S

0

Answer 1

You will need a 1/2" drill bit for the etrailer Trailer Hitch Receiver #e66AR to install on your 2008 Mercury Grand Marquis.

view full answer...

Answer 2

I really like the etrailer Trailer Hitch Receiver #e66AR for your 2011 Mercury Grand Marquis for a few reasons; it has the matte black finish that blends in with any black trim on your vehicle and hides scratches from road debris, plus it has the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Does 1999 Mercury Grand Marquis Need Converter For 4-Flat

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching