What is the Thread Pitch Measurement For Rhino Rack M6 Track Bolts?

Question

Question:

I would like to add some eye nuts to these bolts on the inside of my camper shell. Do you know what the thread pitch is for this M6 bolt? Thanks

asked by: Ken

0

Expert Reply:

The M6 x 35 mm Square Head Bolt for Rhino-Rack Accessories # RR72UB is a M6-1.0x35mm bolt. The thread diameter is 6mm wide with one thread per mm and a overall length of 35mm.

expert reply by: Bud M

0

Answer 1

I may have a solution for you to change the actual locks, but I don't believe there are going to be replacement parts available for that particular RocketBox. You can use the Lock Cores for Yakima Same Key System #Y07202 which includes 2 lock…

view full answer...

Answer 2

If you can find the code from the lock core in your Yakima Rocketbox you can order replacement keys like #Y8772-A147 which fits locks with code A147 stamped into the side of lock cylinder. If you cannot find the code then you can simply replace the…

view full answer...

Answer 3

The T-Slots in your Whispbar crossbars will be the same size as other manufacturers, so you will be able to utilize top channel mounted accessories like the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards #INXA445 for…

view full answer...

Answer 4

I'd be more than happy to help out! These aren't Thule products but the Replacement M6 x 35 mm Square Head Bolt for Rhino-Rack Accessories #RR25XB have that course thread you're asking about, and since the bolts will be in the T-Slot and…

view full answer...

Answer 5

The head of the M6 x 55mm T Bolt for Thule SnowPack Ski and Snowboard Carrier #1500052620 that you referenced is square. The dimensions are 3/4 inch by 3/4 inch.

view full answer...

Answer 6

The bolt head dimensions for the Replacement M6 x 35 mm Square Head Bolt for Rhino-Rack Accessories #RR25XB is 20mm vertical and 20mm horizontal.

view full answer...

Answer 7

We can help you tune-up your pre-owned Yakima Rocket Box rooftop cargo carrier with replacement parts. The page I linked for you displays all Yakima replacement parts for rooftop cargo boxes, including mounting kits, hardware parts and lid supports…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

What is the Thread Pitch Measurement For Rhino Rack M6 Track Bolts?

Product Page this Question was Asked From

Continue Researching