Correct Replacement Base Assembly for Thule Xporter Pro Black Ladder Racks

Question

Question:

Can you get the other side? I only see driver front and passenger rear in black available.

asked by: Dean

0

Expert Reply:

The Replacement Base Assembly for Thule Xporter Pro Ladder Racks part # TH66TD is for the left front or right rear and part # TH68FH is for the right front or left rear.

expert reply by: Conner L

0

Answer 1

The bolt you're describing on your Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack #TH500XTB unfortunately isn't sold separately so you would either need to reach out to Thule to get a replacement or completely replace the base…

view full answer...

Answer 2

I reached out to Thule and they do not offer just the replacement T bolt for some reason. Their suggestion was to replace the entire base. I have listed the parts we have available below. Replacement Base Assembly for Thule Xporter Pro Ladder Rack -…

view full answer...

Answer 3

Yes, you can get these in the black. It is not something that we have carried before, but we can get this part from Thule. The Replacement Base Assembly for Thule Xporter Pro Ladder Rack - Left Front or Right Rear Assembly - Black, part #TH66TD. I…

view full answer...

Answer 4

We do have some replacement clamps for the ladder rack on your 2016 Nissan Frontier but they are specific to the type of ladder rack you have. For a Thule Xsporter we have the #8523159001 for silver and #8523159002 for a black rack. T If you have a…

view full answer...

Answer 5

The answer to your question will depend on what kind of toolbox you have. If you have a chest style that sits completely between the bed sides without resting on the top of the bed sides, the Thule #TH500XT Xsporter would work fine. If you're…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Correct Replacement Base Assembly for Thule Xporter Pro Black Ladder Racks

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching