Are the MORryde Shock Absorbing Suspension Equalizers MR27ZR the Same as the CRE2-35

Question

Question:

Is your Item # MR27ZR, the same as MORryde CRE2-35? They appear to be but I could find nothing in your information to confirm this.

asked by: Mike O

0

Expert Reply:

Yes, the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers # MR27ZR is the CRE2-35 from MORryde.

expert reply by: Scott S

0

Answer 1

The Lippert Equa-Flex #LC145546 is the closest cushioned equalizer from Lippert to fitting your Grand Design 2800BH. This particular kit is rated for 5K-8K axles. The MORryde CRE3000 #MR27ZR is going to be the best option for your camper. While this…

view full answer...

Answer 2

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

view full answer...

Answer 3

Hey Mark! By upgraded suspension do you mean an upgraded equalizer? That is the most common suspension upgrade for trailers. You have 35" axle spacing right now with standard Dexter 13-122 equalizers. The best option is the one that matches your…

view full answer...

Answer 4

Hey Carl, this is a great question that we have checked with MORryde on in the past. They told me in your situation to have you measure from the center of the front hanger bolt to the rear hanger bolt to pick out the correct SRE4000. If that distance…

view full answer...

Answer 5

We currently will not have a kit that contains everything that you are looking for but we do have all the parts you will need. First I recommend upgrading your equalizers to the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR. These…

view full answer...

Answer 6

Hello Mike, thanks for reaching out. I see you already have the kit on order, but I wanted to make sure your question was answered. When Installing the #TSS-106-40 Sumo Springs on a tandem axle trailer, the helper springs will get installed in the…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Are the MORryde Shock Absorbing Suspension Equalizers MR27ZR the Same as the CRE2-35

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching