Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
It’s always smart to make your setup easier to see after dark. This 3" round red Oralite reflector adds bright reflected light to the side or rear of your truck, trailer, or equipment. Even when it’s not powered, it reflects headlights clearly so other drivers notice it sooner. It meets FMVSS requirements for reflex reflectors and is SAE J578 and J594 compliant, so you know it’s up to safety standards.
Outdoor gear takes a beating from sun, rain, and road grime, but this reflector holds up. The tough polyester body resists cracking, fading, and peeling over time. It stays clear and reflective even after long exposure to weather and rough conditions, making it a solid choice for equipment that lives outside year-round.
You don’t need tools or extra hardware to install this reflector. The self-adhesive backing lets you just peel and stick it onto a clean surface—no drilling or screws required. It’s an easy way to add visibility anywhere you need it without adding extra work.
Once installed, this reflector keeps doing its job for years without maintenance. It’s backed by a 7-year warranty, giving you peace of mind that it’s built to last through everyday use and harsh environments alike.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Oralite red reflector. This red reflector makes your truck or trailer more visible to other drivers. This is designed for use on the side or rear of your truck, trailer or equipment. It's made from a tough, polyester construction and it's going to feature the adhesive backing so it functions as a sticker. Just peel that off and apply it to mounting surface, makes installation quick and easy. It is SAE and Department of Transportation compliant. It meets FMVSS requirements for reflex reflectors when properly mounted.
It's also SAEJ578 and J594 compliant and the product is made in the USA. Taking a look at the diameter you can see that the reflector itself is going to measure three inches, and that's the diameter of the unit and with this part number you're going to get one reflector. That's going to do it for today's look at the Oralite red reflector.
Customer Satisfaction Score:
49% were satisfied with this product
51% of customers were not satisfied
Ratings & Reviews
Great reflectors.
Perfect for what I needed. My motorcycle trailer is low. So I needed these to hopefully protect my rear
These are great reflectors.
Bright reflectors...will buy again
you guys are the best / i used it on the back of my snowmobile its that time of year to get ready to ride /the factory one broke last year and this was fit the bill / thanks steve T
Great product
Made out of a durable product, very reflective and the adhesive had no issues sticking to the trailer.
Made out of a durable product, very reflective and the adhesive had no issues sticking to the trailer.
Well made and easy to apply.
Quick shipping. Item was as described. A little pricey for two rectangular stuckers. This is an exact replacement for the one that was damaged on my Mason dump bed.
I think the reflectors will work, except for the one that was folded when fitted into mailing envelope resulting in a severe crease that will probably cause it not to adhere to my boat trailer. etrailer staff should have more carefully folded the reflector at a blank space of the backing paper rather than fold the actual reflector. Shows me there was a lack of care and professionalism.
I chose this style reflector because the previous owner had run into something on one side of the boat trailer and the fender was far from flat, stuck great and look nice and bright!
My wife thinks I'm a safety nut. She is right. Added a few of these reflectors to the trailer tongue area to enhance visibility of the structure at night. I'm happy and she tolerates me.
HIGH VISIBILITY
I am using this product to weather proof small damage to my Minnie Winnie MH fiberglass siding. The damage is on the rear corner. These will weather proof the damage and prevent delimitation.
Was looking to find a simple, adhesive sticker red reflector with a darker red color. This should do the job, pleased with the color. The videos you guys post with the products were very helpful, led me to choose the right product.
I used this to cover a hole in a side mirror, stone damage, with something better looking than duct tape and somewhat functional. It serves as a reflector for those mirrors sticking out the side of my pickup. Especially helpful when they're extended for towing.
It's a pretty simple item so there isn't much to say. eTrailer shipped it out promptly and it works, so far. Have to see how well it holds up to weather and road grit.
It wasn't quite wide enough or long enough to look good but it's better than the hole. Plastic reflectors I could find were too narrow or round and too large.
Excellent. Sticks well to a slick surface and super reflective! Good purchase.
Does the job
These reflectors are pitiful, when I see others for almost the same price which have a adhesive backing on a hard surface. These are worth about $.xx each.
Love the reflectiveness of these, if you have had the hard plastic ones you know the adhesive sticks to the surface really well but not hard plastic. You wind up with a white spot that is hard to get off and no reflector!
These work great on the back of my trailer, with no grief!
Item was not what I expected. I thought I was buying a firm plastic reflector with a glue-on back. This is just a sticker type refector with a sticky backing affixed to paper...appears to be torn off a roll of similar stickers. Looking back at the description more closely, I can see how I made my mistake. However, it is not as robust as I need.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Heather A.
10/3/2018
If you are looking for an acrylic style reflector I recommend part # RE21RB. This optrontics 3 3/16 round reflector is made of a durable acrylic construction and has an adhesive back.
Helpful Links
Trailer-Lights/Optronics/RE21RB.html