Correct Shank for Pro Series Tri-Hitch Ball Platform

Question

Question:

I have the Reese Pro Series weight distribution hitch 113913. If I remove the weight distribution head off the shank, will this fit on the shank?

asked by: PT

0

Expert Reply:

Thanks for reaching out and providing photos!

The head of your Reese Weight Distribution System part 113913 is designed to fit a shank with flush sides where the bolts secure like what we see with part part # RP54970, but the Replacement Hitch Ball Platform # PS63075 installs on shanks that have a groove on the sides like what we see with the part # 63911.

If you want that ball mount then we have it kitted together as the Pro Series Adjustable 3-Ball Mount for 2" Hitches # 63070 but at that point I just recommend going with the B&W Tow & Stow 3-Ball Mount # BWTS10048B which is in the same general ballpark when it comes to price point but is in a completely different league when it comes to ease of use and quality.

Attached are some videos for you to check out.

expert reply by: Jon G

0

Reese Weight Distribution System Part 113913
(click to enlarge)

Answer 1

Hey Chad! What kind of camper do you have? The Reese Pro Round Bar Weight Distribution #RE34FR can be used with the shank flipped over in the rise position to get you the height you need. Also yes, you can swap out the hitch ball with the #A-90. Let…

view full answer...

Answer 2

Hey Gerard, the best hitch solution we have for your 2022 Jayco Jay Feather Micro Travel Trailer would be a multi fit hitch like the Curt #13703 which can fit all frame styles that are between 22 and 72 inches which would work great with an RV…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Correct Shank for Pro Series Tri-Hitch Ball Platform

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching