Will MORryde RV Door Latch Extender Fit With Any Brand Latch Handle

Question

Question:

Is this handle specific to a particular brand latch handle? My 5th wheel has Global Link latches. Will it work for that?

asked by: Perry R

0

Expert Reply:

The MORryde RV Door Latch Extender # MR22JR is a universal fit and will work with any paddle style latch with the proper clearances.

Attached are some photos of those clearances along with a review video for you to check out. You can also find these clearances in the linked installation instructions.

expert reply by: Jon G

0

MORryde RV Door Latch Extender Step 1
(click to enlarge)

MORryde RV Door Latch Extender Step 2
(click to enlarge)

MORryde RV Door Latch Extender Step 3
(click to enlarge)

Answer 1

We offer four different options for replacement king pins with the only difference being the thickness of the bolster plate. I've attached a link to those options below. If you were instead wanting to replace the entire pin box then you'll…

view full answer...

Answer 2

Thanks for the picture of your AC unit. Based on that for a white replacement you would need the part #DMC46FR.

view full answer...

Answer 3

Hi Kim, Yes, the MORryde RV Door Latch Extender #MR22JR would be a compatible fit with an RVLock branded entry door lock. You'll just want to double check that you have enough clearance based on the steps listed below.

view full answer...

Answer 4

For a 29-1/2 inch door opening the Lippert Solidstep Lift Assist you'd want is the part #LC733937.

view full answer...

Answer 5

Hey Priscilla, since you have a Dometic water heater that currently has a 16 inch by 16 inch door currently the correct Furrion Tankless Water Heater would be the part #FR32TD that you referenced which comes with this size door. Are you ready for…

view full answer...

Answer 6

Hey Dan, welcome back! I'm assuming this is for the same 2025 you asked about before. The Safe-T-Plus Steering Stabilizer #ST98MR is what you need. This is designed to fit a Class C E-450 and comes with the custom mounting brackets. How are you…

view full answer...

Answer 7

Hey Paul, thanks for reaching out. The MORryde GooseTech 5th Wheel to Gooseneck Pin Box is designed to match the height and length profile of the original pin box it replaces, so the overall dimension from the top of the pin box housing down to the…

view full answer...

Answer 8

Hey MJ. The high ends 24,000 lbs. The MORryde GooseTech 5th Wheel to Gooseneck Pin Box item #MR24MV is going to fit any trailer with a Rhino-Pin box and GVWR over 18,000 lbs up to 24,000 lbs GVWR. I've attached the GooseTech fit chart below from…

view full answer...

Answer 9

Hi Mark! You are 100% correct! The Demco Autoslide Head and Base Assembly - 5th Wheel Trailer Hitches - 21K #DM6107 and the 18K #DM6077 both use the exact same Demco Autoslide Side Plates - Ford Super Duty #DM6033 to make them custom fit to your 2020…

view full answer...

Answer 10

When you install the camper side panel of the Solera Family Room #LC362230 you will be trimming out an opening for the steps to pass through. I have attached a link to the installation instructions below but here is a picture for you to understand…

view full answer...

Answer 11

Hey Richard. The difference in the three MORryde hand rails is how far they extend away from the side of your trailer and how long the railing goes down the stairs. The MORryde item #MR34RV extends out 16" from the mounting point and has a…

view full answer...

Will MORryde RV Door Latch Extender Fit With Any Brand Latch Handle

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching