Recommended Hidden Trailer Hitch For A 2022 Hyundai Sonata

Question

Question:

I want a trailer hitch that is hidden for my 2022 Hyundai Sonata that I can haul my bike with

asked by: Daryl

0

Expert Reply:

Out of the two trailer hitches that we have confirmed to fit your 2022 Hyundai Sonata The Draw-Tite Sportframe Trailer Hitch # DT74MR has the most hidden design. The trailer hitch has a concealed cross tube that will give your 2022 Hyundai Sonata the clean off the lot factory look.

The trailer hitch has a 1-1/4 inch by 1-1/4 inch receiver and has a tongue weight up to 200 pounds. In addition to the trailer hitch you will also need a class 1 bike rack. The Swagman Trailhead 2 Bike Rack # S63360 can carry up to 2 bikes weighing up to 35 pounds apiece.

This bike rack has a special feature that allows you to tilt forward the bike rack to allow easy rear-cargo access. The rack comes with an anti-rattle, threaded pin and clip that will help secure the rack to the trailer hitch. For piece of mind you can also lock the carrier to your vehicle with The Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029.

I attached a review video link below showing details on the Swagman bike rack.

expert reply by: Noah E

0

Answer 1

The best hitch for your 2023 Hyundai Sonata is going to be the Draw-Tite Trailer Hitch item #DT74MR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs…

view full answer...

Answer 2

Yes, the Draw-Tite Sportframe Trailer Hitch #DT74MR is confirmed to fit your hybrid model of 2021 Hyundai Sonata. If you need a wiring harness to complete your setup, I recommend the T-One Vehicle Wiring Harness #TK97FR. This harness will provide…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Hidden Trailer Hitch For A 2022 Hyundai Sonata

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching