Ground Clearance & Hitch Pin To Bumper Distance On etrailer Receiver # e56RR For 2021 Toyota Sienna

Updated 10/24/2022 | Published 10/23/2022

Question:

I have a 2021 Toyota Sienna XLE. I see you have a available a hitch that should work fine for me. I have a bike rack that fits into a 2inch receiver. I have owned other Siennas and have had trouble with two things when carrying bikes. One is the ground clearance in my driveway and the other is the distance the rack is from the rear body. Therefore, if possible, could you provide me with two dimensions regarding this rack? What is the distance from the ground to the bottom of the receiver when installed and on level ground? What is the horizontal position of the receiver does it extend beyond the bumper or is inside the bumper? Thanks very much for your help.

asked by: Rick M

Expert Reply:

The 2" etrailer Trailer Hitch Receiver # e56RR is confirmed to fit your 2021 Toyota Sienna XLE. It has a measurement of approximately 9-1/2" from the ground to the bottom of the receiver tube. Do note that this measurement can easily vary on different vehicles based on the amount of weight inside the vehicle to the amount the suspension may have drooped. The receiver pin hole to the rear edge of the bumper is approximately 3-1/2". This measurement is used rather than using the end of the receiver as the hitch pin is a definite point and manufacturers can have different length receiver tubes. The edge of this receiver will not stick out past the rear edge of the bumper.

expert reply by: Bud M