What Wire Goes Where When Installing the Solenoid From the Replacement Master Cylinder w/ Lockout
Updated 10/24/2022 | Published 10/23/2022
Question:
I have a da91 that I just received from your company and the reverse solenoid has 2 wires and my existing one had only 1. do I just hook up 1 to ground and the other to harness and if so which one is positive and which one is ground?
asked by: Tom S
Helpful Expert Reply:
One of the wires from the solenoid on the Replacement Master Cylinder w/ Bypass Electric Lockout for Demco Actuators # DM5918 will be your power wire that goes to the reverse circuit and the second wire is a ground wire that will go to a good grounding source. It does not matter which wire is used for which.
Product Page this Question was Asked From
Replacement Master Cylinder w/ Bypass Electric Lockout for Demco Actuators - Disc Brakes
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Master Cylinder
- Demco
more information >
Continue Researching
- Q&A: Replacement Master Cylinder For Demco 05680-C On Crownline Trailer With UFP Disc Brakes
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Q&A: Replacement for Gabriel Shock Model 610712
- Q&A: Replacement Master Cylinder For a Demco DA16 Surge Brake Actuator
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Where To Mount The TST TPMS Repeater On A 2020 Grech Strada RV
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How Much Does a Boat and Trailer Weigh?