Parts Needed To Add a 7-Way To a 1999 Ford E-350 15 Passenger Van With Factory 4-Way

Question

Question:

Hi Im looking for a round RV plug style wiring harness for a 1999 Ford e350 15 passenger van with factory tow package. It already has the four wire and the factory plug is under vehicle for it thanks

asked by: Tim B

1

Helpful Expert Reply:

I have a couple options as we do not have a 7-way that will connect to your factory connectors on your 1999 Ford E-350 15 passenger van. First if you can identify the wiring for the charge line and brake controller line you will be able to connect the Curt Trailer Connector Adapter # C57672 to your current 4-way and wire in the connections for the brake controller line, charge line and reverse circuit.

If you are unable to identify the additional wiring or they are not working the Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you with the same style 7-way that will connect to the 4-way. This kit will include the wiring needed to run to the battery and also be able to hardwire in a Brake Controller # 90195.

expert reply by: Bud M

1

Answer 1

The main difference is that Curt Hitch #14053 during the installation process the spare tire will have to be lowered or removed temporarily. The Curt Hitch #14055 does not require that step. Both hitches have a bolt on installation and have a gloss…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

Hello Andy! Yes, I would be happy to put together a flat tow package for your 2019 GMC Canyon. Here is what I recommend: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-523182-5 - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Parts Needed To Add a 7-Way To a 1999 Ford E-350 15 Passenger Van With Factory 4-Way

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching