Will RoadActive Suspension Custom Leaf Spring Enhancement Kit Fit Lifted 2020 Toyota Tundra

Question

Question:

Will the road active leaf springs for the 2020 tundra work if it’s been lifted it has an aftermarket suspension on it. But-leaf springs are still stock. I’m just looking to reduce squat in the truck and increase load capacity

asked by: Brandon

0

Expert Reply:

Yes, since you still have the stock leaf springs the RoadActive Suspension Kit # RAS4611TD will fit your 2020 Toyota Tundra. The RAS secures under the leaf spring and around the factory U-bolts and eye bracket. This will help keep you level while reducing sway and body roll. However, no suspension enhancement can increase your load capacity, it only adds additional support. You will be limited by the capacity of your truck.

expert reply by: Robin H

0

Answer 1

Thank you for the excellent photo of the TRD anti-sway bar on your 2018 Toyota Tundra. And yes, the RAS kit is absolutely compatible and will fit your '18 Tundra with the anti-sway bar; the correct fit for your truck is the following: -…

view full answer...

Answer 2

I spoke to SuperSprings and their SumoSprings Solo Custom Helper Springs #SSR-610-40 may work on your 2018 Tundra, but you will need to measure something to make sure as they are designed for stock ride height. When the #SSR-610-40 is installed, it…

view full answer...

Answer 3

The RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS4611TD will definitely help lift the rear of your 2019 Toyota Tundra. This kit is specifically designed to help keep your ride level when towing or hauling a heavy load like your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Joe. To connect the Parkit360 Force Electric Trailer Dolly item #PA46VR to your trailer's battery, you'll need the Bulldog Winch Front Wiring Kit item #BDW20025. The Bulldog Winch Front Wiring Kit item #BDW20025 has the same style…

view full answer...

Answer 10

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 11

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 12

Hey Kevin, yes we have the SumoSprings kit part #SS46KJ that is a fit for your 2025 Chevrolet Silverado 2500 HD. This is the medium density foam spring provides 2,800-lb support capacity at 50% compression and also requires no drilling for install!…

view full answer...