What is the Ball Capacity of Buyers Products 15 Ton Combination Pintle Hitch

Question

Question:

Hello, I have a question about the 15 ton pintle hitch/ball combo, item number BP38FR. I am wondering what the capacity of the hitch is if you are using the ball? . Thank you.

asked by: Brian K

1

Helpful Expert Reply:

The Buyers Products 15 Ton Combination Pintle Hitch w/ 2-5/16" Ball # BP38FR has a maximum gross trailer weight of 30,000 lbs and max tongue weight of 6,000 lbs. Whether you are using a coupler with the ball or a drawbar/pintle ring the capacity remains the same.

expert reply by: Robin H

1

Answer 1

We actually have a mounting kit for the Pintle kit part #BP38FR with the part #3378520 which comes with 1/2 inch diameter 2 inch long bolts.

view full answer...

Answer 2

We do have a bolt on Pintle Hook with a 10K capacity. Check out part #C48205. You may also need a mount to attach the pintle hook to so use it in a 2-inch trailer hitch receiver. You can use #63057. And for hardware you can use #43076. I have…

view full answer...

Answer 3

The Buyers Products 15 Ton Pintle Hook with Mounting Kit #33710040 actually comes with the mounting hardware needed to get it installed but if you're needing to replace it you can find it with the Pintle/Combination Hitch Mounting Kit #3378520.

view full answer...

Answer 4

We do carry the hardware kit #3378530 which will fit the buyers Pintle hook #337PH45 that you were looking at. The bolts technically are made for the buyers 30 ton pintle hook like part #337PH30. They will fit the 45 ton just fine. These are the…

view full answer...

Answer 5

The holes on the Buyer's Products Bolt-On 2-1/2" Hitch Receiver #BP82FR are spread 3-1/2" vertically and 3-3/8" horizontally. And the Buyers Products 15 Ton Combination Pintle Hitch w/ 2-5/16" Ball #BP38FR has the mounting…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What is the Ball Capacity of Buyers Products 15 Ton Combination Pintle Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching