What Is The Uneven Rub Rail Trim # 36283-955 Used For

Question

Question:

Is this used as a trim/border around etrack flooring and walls on enclosed trailers?

asked by: Fred N

0

Expert Reply:

The Uneven Rub Rail Trim for Enclosed Trailer # 36283-955 is used to cover and protect unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. The trim has an aluminum construction and is sturdy and rustproof. The trim can be cut to fit your application.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

Answer 6

Hi Ron, I reached out to Stromberg Carlson to confirm that the Lend-A-Hand Banister RV Handrail part #SC48TR would work with trailers with corrugated sides, and they said that it will! They also let me know that once the brackets that install the…

view full answer...

Answer 7

In order to replace the 235/80-16 tires you have on your trailer now, I recommend using the Provider Radial Trailer Tire part #PRG80235. This tire has a load range G rating (4,080 lbs) which will work well for you so long as the total weight of your…

view full answer...

Answer 8

You can verify that the 10-19 grease seal included in Bearing Kit #BK2-100 is the correct one for your spindles by taking two measurements. First you want to measure the rear hub bore where the seal is inserted. The seal's outer diameter needs to…

view full answer...

Answer 9

Hey Pete! The only options we have for a 15,000 Btu system with a heat pump are the GE S Series Deluxe Plus RV AC item #GE57FR in black or item #GE37FR in white. These are brand new and as of 3/12/25 we do not have the distribution boxes available.…

view full answer...

Answer 10

Hey Jonathan. If you're wanting to have an airbag set up alone with a 5th wheel hitch, you will want to get a FIrestone kit. The Airlift kit you asked about, part #AL88341, will not be able to be installed along side a 5th wheel, or gooseneck, as…

view full answer...

Answer 11

Dan, this is a good thing to clarify before you make the switch. The Nomad is a static, non-cushioned pin box, so it won’t soften the ride the way a shock-absorbing or torsion-style upgrade would. You’re choosing the Nomad for simplicity, bed space,…

view full answer...

Answer 12

Hey Mike! Since the ceiling controls on the #CM43RR would be too high to reach you can use the Coleman-Mach Signature Mach 15 RV Air Conditioner System #CM32RR with the wall thermostat. This is the ducted version, but the AC itself is the same with…

view full answer...

What Is The Uneven Rub Rail Trim # 36283-955 Used For

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching