To add a gooseneck hitch to your 2024 GMC Sierra 2500 with a 6-3/4' bed, I recommend the B&W Custom Underbed Installation Kit item #BWGNRK1020. It has a massive 30,000 lbs capacity and fits both the 6-3/4' and 8' bed lengths. The…
I highly recommend the B&W Gooseneck hitch for your 2024 Chevy Silverado 2500, which is the following part: - B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 This is a custom fit hitch that allows you to store the hitch ball…
Hi Jason, We're unable to verify what seal is on any specific trailer, unfortunately, so to determine the right one for your Jayco, you'll need to know the shape and take a quick measurement. The #SR26ZR is 3/4" wide x 1/2" tall and…
I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
The etrailer A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include…
I did some looking around and it looks like the closest we carry to what you're looking for is the Z-Rail for Enclosed Trailer #362417-955. This rail measures 93-1/2" long x 2" tall x 1-1/2" deep but can be cut to fit your…
The factory hitch on your vehicle is integrated into the factory bumper mounting brackets, so removing the OEM hitch will result in losing your bumper. My contact at Curt tells me that he also had an early 2000's F-150, and he ended up having to…
First of all did this problem just start happening? If the trailer has always worked fine before on the same truck then it's likely a short on the trailer's brake wiring. I would start by cleaning the connector and make sure it's free of…
The Uneven Rub Rail Trim for Enclosed Trailer #36283-955 is used to cover and protect unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. The trim has an aluminum construction and is sturdy and…
I went out to the warehouse and compressed both the #SR26ZR and the #SR76ZR and found that the #SR26ZR is approximately 3/8" thick when fully compressed and that the #SR76ZR compresses down to just a hair past 1/4". The base of the #SR26ZR…
The closest option we have is the Flat Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/4" Deep - Aluminum #36286-955 which is 1-1/2" wide, but is not white. The #36286-955 comes in 93-1/2" long stick but can be cut to size to…
Filter Results
