Correct Control Module for Double Step on 2011 Winnebago Vista Motorhome with Kwikee 1510000

Question

Question:

Need to replace electric step controller in 2011 Winnebago Vista motorhome, 2-step. PN 1510000 140 REVOA

asked by: Michael V

0

Expert Reply:

I spoke to my contact at Lippert Components (LCI) and they informed me that the Lippert Components Kwikee Revolution Step Control Module part # LC363980 is the correct replacement model for your Lippert Components Kwikee Revolution Steps part number 1510000 on a 2011 Winnebago Vista Motorhome.

expert reply by: Conner L

0

Answer 1

Hey Todd! The replacement for your 1510000140 is the Replacement Control Unit for Kwikee 40 Series Electric RV Steps #LC363985. Any big plans with the Odyssey once you get the stairs up and running again?

view full answer...

Answer 2

While I could not get the video to play, it sounds more like a control unit issue rather than a motor issue. The control unit should sense when the steps are closed and shut off the power for retracting and not spasm. Since you mentioned so many…

view full answer...

Answer 3

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 4

Thanks for your question, Ron I can definitely look into that for you. Some information I'll need is what model of Mach you have and how old it is. There was a recent change with what refrigerant is used and because of that most if not all parts…

view full answer...

Answer 5

Hey Tom! The old control module is not available. Unfortunately, you can't just add the new control module and get it to work with the rest of the parts on your step. You will need the Replacement Motor with Table for Kwikee 25 Series Electric RV…

view full answer...

Answer 6

The correct replacement control for your 1510000140 step control is the Replacement Control Unit for Kwikee #LC363985. Since most of your functions seem to be working correctly, I would start by checking the 4-way connector before replacing the…

view full answer...

Answer 7

I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Correct Control Module for Double Step on 2011 Winnebago Vista Motorhome with Kwikee 1510000

Product Page this Question was Asked From

Continue Researching