Result: headlights

Hi Lance, The chassis of your 2014 Forest River Sunseeker 3010DS should be a Ford E-450 which is equipped with hydraulic brakes so the Demco Air Force One part #SM99243 will not work for your flat tow set up. To flat tow your 2022 Ford Maverick, if…

Whenever available I always recommend a Class III 2 inch hitch for vehicles as they have higher towing capacities and since more accessories are made for 2 inch hitches they offer greater flexibility as well. For that you would want the Draw Tite…

I spoke to my contact at Lippert Components (LCI) and they informed me that the Lippert Components Kwikee Revolution Step Control Module part #LC363980 is the correct replacement model for your Lippert Components Kwikee Revolution Steps part number…

The listed towing capacity of your 2004 Chevy Silverado LS short bed with 5.3L engine is going to vary depending on some specifics of the vehicle. If the Silverado is four-wheel drive and has a 3.73:1 axle ratio, the capacity is 7,800 lbs (extended…

Hey Ed, No, the Westin Safari Light Mounting Bar with Installation Kit #30-0005-1335 is fit for 2001-2005 Toyota Highlanders. It looks like none of the vendors we carry currently offer a bull bar for your '13 Highlander unfortunately, but there…

Hey Michael, I looked up pictures of your 2015 Thor Vegas and it looks like it has the Command Electronics trailer taillights like the part #CE44VR so for replacement lenses you'd need the part #328-89-230L and the part #328-89-231CL. If you have…

There are 2 options from Air Lift for you to add Air Helper Springs on your 2016 Nissan Titan XD with the OEM gooseneck hitch. The LoadLifter 5000 #AL57229, and the LoadLifter 5000 Ultimate with Internal Jounce Bumpers #AL88229. Either of these…

I've linked to a diagram showing the dimensions of the Command #CE44VR trailer lamp. We don't have a video completed as of yet, but when we do, it'll appear on the website.

According to your owners manual, you can absolutely flat tow your specific model. It is not recommended to tow this vehicle over 65 mph. You will also need to start the engine and allow it to run for five minutes at the beginning of each day and…

The confusion is that the two answer pages have two different hitches they are referring to. The #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches. I attached a picture that has…

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.

The correct hangers that you need to use for the 5-Leaf Double-Eye Spring #e34SR and the Dexter Heavy-Duty Suspension Kit #K71-359-00 come in the Kit #H248. For your application these need to be spaced 29-1/2" apart on center. I have attached a…