What Are The Dimensions of the TorkLift Lock and Load SideKick Cargo Tray?

Question

Question:

wondering if i can get the exact spec of the tray for Part number TLA7901. what is the clear inside dimension LxW and the height of the side wall. Thank you

asked by: Kevin

0

Expert Reply:

The 16x21 TorkLift Lock and Load SideKick Cargo Tray for 2" Hitches # TLA7901 has an interior measurement of 16" across, 21" wide, and has a adjustable sidewall height of 16-1/2" - 18-1/2" tall.

I have included a diagram of these measurements for you to check out as well.

expert reply by: Bryce D

0

TorkLfit Lock and Load SideKick Dimensions
(click to enlarge)

Answer 1

The 24x27 TorkLift Lock and Load Maximum Security Cargo Tray #TLA7752 that you referenced is rated for the rougher ride quality that is present at the rear of travel trailers like yours which is a bit rougher like you noticed. I attached a picture of…

view full answer...

Answer 2

Yes, the TorkLift Lock and Load SideKick #TLA7901 that you referenced will fit a Honda 2200 generator like you mentioned. We had the chance to fit one on this carrier and it worked well. See attached picture. It's also in the review video for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 7

Hey Hiroshi, thanks for the information. The closest portion of the 16x21 TorkLift Lock and Load SideKick Cargo Tray item #TLA7901 is going to be 6" away from your trailer's hitch pin hole. The inside of the tray measures 21-1/4" long x…

view full answer...

Answer 8

The Space Dock 2" Receiver Adapter for TorkLift Palomino Landing Pad Bumper #TLA7900 has a 2" receiver but while the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray #TLA7752 will technically fit, the Space Dock is only meant to be…

view full answer...

Answer 9

I have a solution for you, but the 16x21 TorkLift Lock and Load SideKick Cargo Carrier #TLA7901 is going to provide a pretty tight fit and the upright arms are going to make using the plug-ins while on the carrier difficult. I would instead use the…

view full answer...

Answer 10

The TorkLift Lock and Load SideKick Cargo Tray, part #TLA7901, can carry any generator that fits on it. The generator needs to have a center handle and be no more than 16 inches wide and 21-1/4 inches long. For the height there are three different…

view full answer...

Answer 11

Hey Mark, It sure will! The TorkLift Side Kick #TLA7901 tray measures 21-1/4" long x 16-1/8" wide and your Predator 2500 Watt Generator measures 20-3/8" long x 11-5/8" wide. Its going to be a near perfect fit. What are you using…

view full answer...

What Are The Dimensions of the TorkLift Lock and Load SideKick Cargo Tray?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching