Will TorkLift Space Dock Receiver Adapter Work With Any TorkLift Cargo Tray

Question

Question:

Will the A7900 dock work with A7752 lock and load?

asked by: Daniel W

1

Helpful Expert Reply:

The Space Dock 2" Receiver Adapter for TorkLift Palomino Landing Pad Bumper # TLA7900 has a 2" receiver but while the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray # TLA7752 will technically fit, the Space Dock is only meant to be used with the smaller 16x21 TorkLift Lock and Load SideKick Cargo Tray # TLA7901 so I can't recommend using anything else.

expert reply by: Jon G

1

Answer 1

Hey Stan, KZ would be the authority on what the weight capacity of your bumper would be and if the 24x40 Cargo Carrier part #e99050 would work for you or not. We also have generator specific bumper carriers like the #MNT47ZR as well as more at the…

view full answer...

Answer 2

We have the locking cargo carrier for generators from Torklift with the part number #TLA7752 which does a great job securing generators tightly in travel as well as preventing theft. I attached a review video for this for you to check out as well.

view full answer...

Answer 3

I have a solution for you, but the 16x21 TorkLift Lock and Load SideKick Cargo Carrier #TLA7901 is going to provide a pretty tight fit and the upright arms are going to make using the plug-ins while on the carrier difficult. I would instead use the…

view full answer...

Answer 4

Yes the visual sight indicator you mentioned that you see in some of the product pictures of the 24x27 Torklift Lock and Load Maximum Security Cargo Tray #TLA7752 does come with it.

view full answer...

Answer 5

The best option to use is the Curt Multipurpose Ball Mount with 2" Receiver #D210 as a dual hitch receiver will reduce your Tongue Weight (TW) capacity by 50%. The Curt Multipurpose Ball Mount is rated for 7,500 lbs Gross Trailer Weight (GTW)…

view full answer...

Answer 6

The Adjustable Width Trailer Hitch Receiver part #13703 is what I recommend for a 2015 Jayco Whitehawk. The Adjustable Width Trailer Hitch Receiver can either be bolted or welded to the trailer frame. If you choose to bolt-on, the frame brackets can…

view full answer...

Answer 7

I may have an option for you but It is not a good idea to cut the tongue of the camper and elongate it. It will affect the structural integrity and the tongue weight of the trailer especially if you add a generator to the tongue. It sounds like you…

view full answer...

Answer 8

In order to carry the 3200-Watt Portable RV Inverter Generator w/ Cover #333-0003 on the back of your trailer with the 2" receiver you can use the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs #TLA7752.…

view full answer...

Answer 9

According to my research, the size of a Honda EU3000 generator is 25.8 long x 18.9 wide x 22.4 high. For a carrier that will fit the generator on a 2-inch hitch receiver if you plan to operate the generator on the carrier, I recommend the 20x59 Curt…

view full answer...

Answer 10

The 24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 400 lbs #TLA7752 does not come with a hitch lock antirattle device. I recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span #63232…

view full answer...

Answer 11

Yes you can use an adapter like the Brophy Trailer Hitch Receiver Adapter - 1-1/4" to 2" Hitch #HTAD to adapt your hitch over for use with the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs part…

view full answer...

Answer 12

You'll need to measure the distance between the side stanchions on your Grand Design Imagine 2500RL to determine which hitch will fit, but the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"…

view full answer...

Will TorkLift Space Dock Receiver Adapter Work With Any TorkLift Cargo Tray

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching