Install Video for Trailer Axle w/ Electric Brakes - 4 Drop - 5 on 4-1/2 Bolt Pattern - 95 Long
Updated 08/31/2022 | Published 08/30/2022
Question:
- Do you have an installation video for this axle? - Dexter is nominally $ more than the etrailer assembly. Is there anything to justify the added cost? Thanks
asked by: Jim P
Helpful Expert Reply:
We don't have an install video on this exact axle, the Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs part # e45SR, but I did do one on a similar style which I have attached for you below. It won't be the exact same but fairly close. This axle assembly will be just as good as a Dexter without the extra cost.
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bearing l44649 and l68149 trailer bearings races seals caps
- Search Results: l44649 / l44649 trailer hubs and drums
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Search Results: axletek
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer axles
- Search Results: trailer brakes
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Grease Seals 10-36 (pair)
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Video: What to Know About the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Comparing etrailer And Dexter 3,500lb 4 Drop Axles
- Q&A: Do You Carry a Axle Rated for 3,500 with Hub Face to Hub Face of 94", of do I Need the 95"?
- Q&A: Trailer Jack Option That Allows Me To Lower My Tailgate When Towing My Casita Travel Trailer
- Q&A: Lowest-Profile A-Frame Trailer Jack For Tailgate Clearance
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Will Self-Tapping Screws Hold Trailer Tongue Tool Box 350970 on Aluminum Trailer
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Video: TruRyde Trailer Suspension TRSS238 Review
- Search Results: 7way
- Search Results: idler hubs trailer axles
- Video: Review of the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: All About the Grease Seal
- Shop: Truck Topper