Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
Published 08/24/2022
Products Featured in This Question
Question:
Hi I have a spindle that is bent and I’m looking to replace it and I have pictures of the spindle. I’m unsure of what type of spindle that I need.
asked by: Austin E
Expert Reply:
It appears that the #84 E-Z Lube Spindle # TRU87FR is the correct spindle for your axle. You can confirm that this is the correct part by verifying the measurements of the spindle and brake flange. The landing for the grease seal is 1.719, the inner bearing is 1.378" and the outer bearing is 1.063". The brake flange bolts are 2-7/8" on center vertically and horizontally. This will also have a grease zerk allowing you to more easily fill your spindle and bearings with grease.
Depending on the overall condition of the axle you may consider replacing the entire axle. We have the 95" Axle # e83GR and 89" Axle # e53GR that use the same spindle listed above. They are also available with brakes and hubs 95" # e45SR and 89" # 8327812-EB if you want to replace those components as well.
(click to enlarge)
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68111
- 2-3/8 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Search Results: spindle
- Search Results: wheel arch
- Search Results: trailer axle
- Q&A: How to Confirm Fit of #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Video: Measuring To Choose The Right Trailer Axle
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Search Results: trailer hubs and drums
- Search Results: trailer axles
- Search Results: trailer spindles
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Search Results: trailer fender
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Video: Trailer Axle with Idler Hubs Spec Review
- Q&A: Brake Bolt Pattern and Stub Diameter for #84 E-Z Lube Spindle for 3,500 lb Trailer Axles
- Shop: Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2
- Video: Review of DeeMaxx Rubber Hydraulic Brake Line 280 Inch - DE94JR
- Video: Review of Redline Trailer Fenders - Single Axle Fender - J10821
- Video: A Closer Look at the Backing Plate for Tandem Axle Trailer Fender
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Hands-On with the Kodiak Trailer Hub for 3,500-lb Axles
- Q&A: Over Under Conversion Kit Needed To Lower The Height Of A Boat Trailer
- Q&A: Choosing the Correct Replacement Axle Without a Leaf Spring
- Q&A: Replacement Spindle Nut, Washer and Retainer For Dexter Trailer Axle # 7685269-EB
- Q&A: Availability Of 5 On 5-1/2 Hubs For A 5.2K Or 6K Axle
- Q&A: Diameter of Trailer Axle Beam with Easy Grease Spindles e83GR
- Shop: Trailer Hitch
- Shop: Brake Controller
on Trailer Spindles
