Is There a Direct Bolt On Replacement for Shelby 1,000 Lb Boat Trailer Jack

Question

Question:

I’m looking for a Shelby industries trailer jack for heritage boat trailer. The jack bolts on a bracket that’s welded on the trailer. Only marking is on the wheel one size says static capacity is 1000 lbs and other side says “2 03”. Do you have a direct replacement?

asked by: Justin K

0

Expert Reply:

I do have an option for you but Shelby is no longer in business and there aren't any direct replacement jacks which use the same mounting bracket. I recommend simply removing the old jack and placing a bolt-on jack either in front of or behind the old jack bracket. There is also the option of cutting off the old bracket entirely for a nicer install but this is not required. I recommend the Series Snap-Ring Swivel Marine Jack part # PSEJ10000101 which has a wheel for easy maneuverability and a zinc coating for better protection.

expert reply by: Conner L

0

Answer 1

Since we do not have a Shelby jack mounting bracket that goes to the discontinued Shelby Jack #5876A8, I have no way to confirm whether or not a Fulton jack will fit it. With that being said, the Fulton Bolt-Thru Swivel Marine Jack #F1411300301 is…

view full answer...

Answer 2

I have an option for you, but since Shelby is out of business you will not be able to purchase another Model 5856A jack. Instead I recommend replacing it with the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200…

view full answer...

Answer 3

When it comes to replacing your Shelby 5854a trailer jack I recommend switching to The Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - 12 inch Lift - 1,500 pounds #FXPD15L. This jack has a lift capacity of 1,500 pounds, and has a…

view full answer...

Answer 4

If the trailer is heavy, or the ground is uneven, it will be hard to move regardless of which jack you use but if the bearings are wearing out in the old one then a new one would surely take some strain off the user when moving. I recommend a dual…

view full answer...

Answer 5

For a trailer jack similar to the Shelby jack you mentioned I recommend the Fulton #FTJ120W0301. This is a 1,200 pound rated swivel jack with a sidewind handle. It's a weld-on jack with 10 inches of lift.

view full answer...

Answer 6

We offer weld-on and bolt-on trailer jacks that are similar to the Shelby 5764A jack you wish to replace but the jacks we offer are not exact replacements. We do have a jack that has a mounting plate similar to the Shelby mounting plate., It is part…

view full answer...

Answer 7

We did have a customer come back and say that the Fulton jack part #FTJ120W0301 will attach just fine to the pipe mount on the trailer frame where a Shelby jack just like yours was installed.

view full answer...

Answer 8

With a weld-on Shelby jack, you will need to replace it since Shelby jacks are no longer in production. I recommend the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On, part #FTJ120W0301. This will use the existing weld-on bracket and collar…

view full answer...

Answer 9

I do have an option for you but we do not have an exact replacement for the Shelby Jack 5764A. Instead, I recommend taking a look at the Fulton Bolt-Thru Swivel Marine Jack part #FXP10W0301. This jack similar to the Shelby uses a bolt through swivel…

view full answer...

Answer 10

Shelby jacks are no longer in production. If the welded mount had a bolt-thru design, then I recommend checking the pin hole dimensions for compatibility. The bolt hole centers are 3 inches apart on the Jack Mounting Bracket for Fulton Marine Jack…

view full answer...

Answer 11

The Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs #FXP10W0301 will work with the welded plate on your trailer as long as the plate has a measurement of 2-1/8 inches from the center bolt to the center of the pin…

view full answer...

Answer 12

Hello David. We have heard from a few of our customers that Fulton Bolt-Thru Swivel Marine Jack #FXP10W0301 will fit the same mount as your Shelby 5784, although this is not something we have physically confirmed here at our shop. What I can tell you…

view full answer...

Is There a Direct Bolt On Replacement for Shelby 1,000 Lb Boat Trailer Jack

Continue Researching