Replacement Trailer Jack for a Shelby 5764A

Question

Question:

Do you have anything that is equivalent to a Shelby 5764 trailer jack? The jack itself is flat on the side that attaches to the trailer and has a 1” hole. It attaches to the trailer with a bolt welded to the trailer and is tightened by a nut. I only need a jack that has a flat side with a 1” hole. Thanks

asked by: Juan

0

Expert Reply:

I do have an option for you but we do not have an exact replacement for the Shelby Jack 5764A. Instead, I recommend taking a look at the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301. This jack similar to the Shelby uses a bolt through swivel mount. It offers up to 10" of lift and has a 1,200 lb weight capacity. The opening on the jack used for the mounting bolt measures to be .75" in diameter therefore, you will need to cut off the mounting bracket on the trailer and weld or bolt a new one on in it's place with part # P9012-00 in order for this jack to work for you.

expert reply by: Conner L

0

Answer 1

Thank you for that info, and while we have some options for you to replace your Shelby 5764A trailer jack, there isn't one that is going to fit that bolt pattern. So you have a couple of things you can do, which is either have a new plate welded…

view full answer...

Answer 2

Based on my research, the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will be a perfect replacement for your Shelby 5756A trailer jack. This jack will allow you to use the existing snap ring jack mount on your trailer for installation.…

view full answer...

Answer 3

Since we do not have a Shelby jack mounting bracket that goes to the discontinued Shelby Jack #5876A8, I have no way to confirm whether or not a Fulton jack will fit it. With that being said, the Fulton Bolt-Thru Swivel Marine Jack #F1411300301 is…

view full answer...

Answer 4

Swivel jacks fit 3x3 to 3x5 frames but none for a 5-1/2 inch frame. You would need to look at weld-on jacks such as #FTJ120W0301 or consider drilling mounting holes in your frame. If your frame isn't 5.5 inches and you just need that clearance, I…

view full answer...

Answer 5

To replace your Shelby 5856A jack I recommend the Fulton Round Snap-Ring Swivel Marine Jack #FTJ120W0301. We have had customers say that this fits the mounting plate for the Shelby 5784A perfectly. This jack features a lift capacity of 1,200 pounds,…

view full answer...

Answer 6

I have an option for you, but since Shelby is out of business you will not be able to purchase another Model 5856A jack. Instead I recommend replacing it with the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200…

view full answer...

Answer 7

Hey Steve, it sounds like you are looking for the Fulton Boat Trailer Jack part #FXP100W0301 which utilizes the style of swivel bracket that it sounds like you have. The pull pin diameter though is 1/2 inch which is the same size for all of these…

view full answer...

Answer 8

Sounds like you'd need a Fulton jack like the part #FXP100W0301 which is a weld on style jack like what you have that would attach to a bracket like part #P9012-00 that you'd have installed on your trailer most likely. You can send me…

view full answer...

Answer 9

We offer weld-on and bolt-on trailer jacks that are similar to the Shelby 5764A jack you wish to replace but the jacks we offer are not exact replacements. We do have a jack that has a mounting plate similar to the Shelby mounting plate., It is part…

view full answer...

Answer 10

I do have an option for you but Shelby boat trailer jacks are discontinued and we don't offer any direct bolt-on replacements for them. That said, you can easily remove the old flange by cutting or simply place the new jack beside it and leave…

view full answer...

Answer 11

Based on the picture you submitted the Fulton Marine Jack part #FXP100W0301 that you referenced would be exactly what you'd need and would bolt right up to the mount you have on the trailer frame.

view full answer...

Answer 12

I believe the jack you are looking for a replacement for is a frame mounted, swivel jack, sidewind, that has a 2,000 lb capacity and a wheel caster. We did have a customer come back and say that the Fulton jack part #FTJ120W0301 will attach just fine…

view full answer...

Replacement Trailer Jack for a Shelby 5764A

Continue Researching