Air Helper Springs For A 2020 Mercedes-Benz Sprinter 2500

Question

Question:

Hi, Im considering options for the rear of my 2020 Mercedes Sprinter - 4X4, 170 wb 2500 model. Would like to reduce sway, rocking over speedbumps/driveways/etc. Can you comment on: - Timbren Rear Suspension Enhancement System - SumoSprings Rebel Custom Helper Springs - 2 Piece - Rear Axle - Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle.

asked by: Kevin

0

Expert Reply:

The Timbren Rear Suspension Enhancement System # TMBRSP25A are confirmed to fit your 2020 Mercedes-Benz Sprinter 2500.

Using this system will improve your suspension, handling and safety. They will also absorb road shock and improving roll stability. They have an easy installation with no drilling required.

The system has a 11,000 pound capacity but do not exceed your vehicle's weight carrying capacity.

Firestone does not have airbags available for your vehicle.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

As long as your 2019 Mercedes-Benz Sprinter 2500 has a factory plugin connection point for the adapter part #3063-P you will not need to make any modifications to the adapter, it will plug right in into the factory plug and the other end to a…

view full answer...

Answer 2

Hey Howard, you will need to go out and look at your 2014 Winnebago's rear axle to determine which Timbren kit you will need. If the axle is round the correct kit you'd need is the part #T96GR that you referenced or if it's square…

view full answer...

Answer 3

For the front axle of your 2022 Mercedes-Benz Sprinter 3500 I recommend the Timbren Front Suspension Enhancement System #TMBFSP35. These Jounce-style springs will help reduce the side-to-side sway you're experiencing. These rubber springs will…

view full answer...

Answer 4

Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.

view full answer...

Answer 5

I spoke with my contact at Timbren and the overall height (with spacers) for the part #TMBRSP35B that you referenced is 6-3/8 inch, the height of the #TMBRSP35A is 5-7/8 inch, and the #TMBRSP25A is 5-3/8 inch.

view full answer...

Answer 6

For your 2021 Mercedes Benz Sprinter 2500 all you need to install a SumperSprings kit is the part #SS62KV that you referenced. We kit all of the needed parts together with this part number which means it's the only part number you'll need.

view full answer...

Answer 7

The Timbren Rear Suspension Enhancement System part #TMBRSP25A that you asked about won't provide a lift, they will simply prevent sag once a load is applied. These are more so designed for when towing as they mainly just engage when that load is…

view full answer...

Answer 8

In order to find if the Yakima EXO SwingBase 2 Tier Swing Away Hitch Extender - 2" Hitches #Y82VR will allow you to open the doors all the way you will need to take some measurements. The distance from the center of the receiver to the knob at…

view full answer...

Answer 9

If it's the drop leg like #BD500190 that's bent, you certainly can replace it if it's not bent to the point where you can pull the pin and slide the drop leg out. The #BD500190 would be the proper replacement for a Bulldog #BD500185,…

view full answer...

Air Helper Springs For A 2020 Mercedes-Benz Sprinter 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching