Wedge Recommendation for Husky 5th Wheel Hitch and Lippert Turning Point Pin Box

Question

Question:

What wedge will work with this combination or will a standard one work?

asked by: Kevin H

0

Expert Reply:

I recommend using the 5th Airborne Custom Wedge for Husky / Valley Fifth Wheels # SWW-04 for your application as we've found it to fit really well with the Turning Point pin boxes.

Attached is a review video as well as a clip of a customer review showing this working with the Husky 5th wheel hitch.

expert reply by: Jon G

0

Review of Reese Wedge for Husky 5th Wheel Hitch
(click to enlarge)

Lippert Turning Point Pin Box
(click to enlarge)

Husky Sliding 5th Wheel Hitch
(click to enlarge)

Answer 1

We do have the Bearing #25580 and Race #25520 needed for your 16k Lippert Turning Point 5th wheel pin box. Unfortunately, according to Lippert if the inner nylon sleeve is damaged and needs replaced the entire pin box must be changed. And the Turning…

view full answer...

Answer 2

The only gooseneck adapter that can replace a Lippert Turning Point pin box is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. As far as tongue weight goes, the loaded pin weight of your Grand Design 260RD needs to be…

view full answer...

Answer 3

We have had really good reports of the Reese Sidewinder wedge fitting with the Lippert Turning Point (see attached photo of review) and so for your Husky 16K 5th wheel hitch the wedge you'd want is part #SWW-04. This will fit more snug in the…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Eric, Thanks for your question. As long as you are able to remove the factory hitch from your 2025 GMC Sierra 2500, the #C96CR will work as a replacement. Of note, the #C96CR will more than likely mount up a bit differently than your factory…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Wedge Recommendation for Husky 5th Wheel Hitch and Lippert Turning Point Pin Box

Featured Help Information

Miscellaneous Media

Continue Researching