Review of the Sidewinder Wedge for Curt A Series 5th Wheel Trailer Hitches Video

The Curt A16 5th Wheel Trailer Hitch #C16120 weighs 116lbs. The Rail Kit #C38ZV which will fit your 2022 Ford F-150 is going to add an additional 69lbs which includes both the above and below bed mounting components.

The Rota-Flex pin boxes will work just fine with the B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package #BWRVK3710 that you're referencing. To our knowledge the only standard 5th wheel hitches that the Rota-Flex isn't…

Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not require the #C88KR adapter. Only the Curt is going to…

Chucking will be reduced by switching from the Curt R16 to the Curt S20 Slider for E16, A16, and A20 5th Wheel Trailer Hitches #C63DR. I'm not 100 percent sure what type of verification you were referring to specifically, but I can tell you that…

Since your 2022 Grand Design Reflection Series 280RS has a Lippert Turning Point pin box you can use a fixed hitch will weigh less than a slider hitch. So the lightest weight and easiest to use hitch would be the Demco Recon part #DM8550043 which…

Congrats on all your new toys! I do not think a Curt 5th wheel hitch, like item #C16120, is the best for your set up. You would need to purchase an adapter rail item #C88KR to use this hitch with your puck system. This adds weight, cost, and…

Yes, we have an application that will work with your 2019 Ford F-150 with 5.5' bed and Lippert Turning Point Pin Box. With that set-up you are going to need to use a fixed hitch. I recommend the Reese M5 5th Wheel Trailer Hitch #RP30928. This…

The SoftStartRV Soft Start #SSR54FR was designed and tested for all RVs and motorhomes. So you are correct that it can be used for a Furrion A/C as long as it is a single zone A/C. Some of the Furrion models already have a start capacitor. If you are…

Since you're not planning on using the truck for hauling, the load applied to the rear suspension of your truck will be consistent, which means that you won't need the adjustability provided by air helper springs, so we can rule those out…

The correct wedge to use with a Curt A20 #C16140 and a Turning Point Pin Box is the wedge #C16992 that you referenced.

This is a great question and there actually is a really quick and easy way to tell if you have the current (Gen 2) version of the Reese Sidewinder like #RP34FR or an older Gen 1 design. All you have to do is look at the pin box itself and find the…

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…