Comparing Fulton F2 Fully Enclosed Trailer Winches FW20000301 and FW20000101

Question

Question:

What is difference in the Fulton F2 FW2000101 and the FW2000301? Thank You for your time!

asked by: Jeff

0

Expert Reply:

There are no differences between the Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle part # FW20000301 and FW20000101. The different part numbers are used by the manufacturer for packaging and shipping i.e. bulk versus boxed.

expert reply by: Conner L

0

Answer 1

The Fulton winches like the part #F142425 that you referenced use an industry standard type bolt pattern that allows the winch to be basically installed on any trailer. This Fulton XLT winches goes even farther with extra, elongated, holes to ensure…

view full answer...

Answer 2

The Fulton F2 Fully Enclosed Trailer Winch #FW20000301 does not have any kind of adapter plate to allow you to mount it to a different bolt pattern. You will have to drill new holes if you want to use this winch. I attached a diagram below with the…

view full answer...

Answer 3

To replace your old Fulton XLT1401 Trailer Winch I recommend using the Fulton F2 Fully Enclosed Trailer Winch part #FW20000301. This winch has a bit higher weight capacity than the XLT1401, so it's going to put less stress on the winch and make…

view full answer...

Answer 4

Yes the Fulton F2 trailer winch part #FW16000101 is going to bolt right up in place of the F2 that you have now. It would be a super easy install. What jack do you have on your trailer? If you can let me know that I can see what you might need as a…

view full answer...

Answer 5

In order to replace the Fulton XLT1401 Trailer Winch I recommend using the Fulton F2 Fully Enclosed Trailer Winch part #FW20000301 which will actually be an upgrade for you. The added weight capacity is going to put less stress on the winch which in…

view full answer...

Answer 6

Fulton winches like the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap part #F142418 are made in Mexico according to Fulton. If you are looking for a winch made in the USA you may consider the Dutton-Lainson Covered Hand Winch part…

view full answer...

Answer 7

Hey Bill, so if it was me I would go with the Dutton Lainson winch part #DL17085 over the Fulton. I really like DL winches because they are well made, very reliable, and made in the USA. Fulton winches aren't terrible but DL winches win if for…

view full answer...

Answer 8

The covers of the Fulton XLT part #F142425 are removable with a Torx head wrench. If you are looking for basically the nicest hand winch around this would be the winner. Our customers who have this winch all really like it so I know you will like it…

view full answer...

Answer 9

The Fulton F2 Fully Enclosed Trailer Winch #FW16000101 has an overall height of right at 6-1/2 inches. At its longest point, it measures 8 inches. The handle length can be adjusted to either 6 or 7 inches and the winch has a hub diameter of 0.65…

view full answer...

Answer 10

The left hand version of the Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish part #DL14927 is Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - Left Side Handle part #DL16331. The capacity of the left hand winch…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Comparing Fulton F2 Fully Enclosed Trailer Winches FW20000301 and FW20000101

Continue Researching