Replacement Fulton F2 Trailer Winch for Ranger Boat Trailer

Question

Question:

Will this winch bolt up and fit Ranger Trailer 2007. VX 520 is boat model. Fulton F2 - 1600# My original is wore out - I bought an after market 1800# and it doesnt winch boat tight to roller as wheel on winch is to high and buckle is to big love the feautures on this one IM thinking it will work as standard bolt pattern on most just want to be sure it will work correctly. also do have trailer jack for this same trailer. Its center swing up model.

asked by: Roy J

0

Expert Reply:

Yes the Fulton F2 trailer winch part # FW16000101 is going to bolt right up in place of the F2 that you have now. It would be a super easy install.

What jack do you have on your trailer? If you can let me know that I can see what you might need as a replacement. Or you can get me a picture of it.

expert reply by: Jameson C

0

Answer 1

Hey Darrel, to bleed the Dexter Zinc-Plated Brake Actuator #T43397007K that you referenced you would need to use a 2x4 and the safety chains to push on the coupler of the actuator to pressurize it. See attached picture and also the attached help…

view full answer...

Answer 2

What you have there is a Dutton Lainson jack. There is no longer a direct replacement jack, but you can use the #DL22580 which will be an upgrade. This is a swivel jack with a 1,500 lb capacity and 12" of lift. This has dual wheels for easy…

view full answer...

Answer 3

The Fulton F2 winch #FW20000301 uses an industry standard mounting pattern. The industry standard mounting pattern is basically a triangle-shaped bolt pattern. The two bolts at the bottom are 2-1/4 inches apart on center. The top bolt is 4-1/2 inches…

view full answer...

Answer 4

The Dutton-Lainson Covered Hand Winch #DL17027 is going to be 10" long (at its' longest point) x 5-1/2" wide x 6-1/4" tall; the base is going to be slightly shorter at roughly 8-1/2" long and the handle is 9-1/2" long.…

view full answer...

Answer 5

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 6

Reverse lock out solenoids are not polarity sensitive so you could run either the white or the blue wire of the Dexter coupler part #DX99FR as the power or ground and you'd be totally fine.

view full answer...

Answer 7

In order to replace the Fulton XLT1401 Trailer Winch I recommend using the Fulton F2 Fully Enclosed Trailer Winch part #FW20000301 which will actually be an upgrade for you. The added weight capacity is going to put less stress on the winch which in…

view full answer...

Answer 8

Hey Art, thanks for reaching out! Since your trailer has electric brakes you'll need a standard coupler and for that I recommend checking out the Demco Channel Tongue Trailer Coupler #DM15000-52 because it has their EZ Latch system for easier…

view full answer...

Answer 9

The Dexter Brake Actuators use a 3/16" fitting so you'd need a brake line like the Kodiak Hydraulic Brake Hose part #bh-3mfs-2 which could then be joined to your existing lines using the Kodiak Union Fitting part #BH-C-3FIF. Please note, you…

view full answer...

Answer 10

You can use a fold-away hinge kit with a surge coupler but you will need to replace the hard brake line with a flexible hose like #T0777300 that you have referenced. For fold-away drum brake applications use #T4839000. For a 3 x 4 inch tongue use 2…

view full answer...

Answer 11

For a brake controller I would recommend the Prodigy P3 Brake Controller part #90195 for basically every towing situation but especially for an electric over hydraulic setup like what you have. This is our best selling brake controller because of how…

view full answer...

Answer 12

There are no differences between the Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle part #FW20000301 and FW20000101. The different part numbers are used by the manufacturer for packaging and shipping i.e. bulk versus boxed.

view full answer...

Replacement Fulton F2 Trailer Winch for Ranger Boat Trailer

Continue Researching