Recommended Trailer Hitch for a 2015 Mercedes-Benz M-Class ML350

Question

Question:

CURT Trailer Hitch - C13010 Class III 2 Inch Hitch 4000 lbs GTW CURT No Cross Tube 400 lbs TW Custom Fit Hitch THIS WILL FIT ON MY 2015 MERCEDES BENZ ML350 FOR BIKE RACK 2X BIKE NO THING ELSE NEEDED.

asked by: TIMMY T

0

Expert Reply:

The correct trailer hitch that is confirmed to fit a 2015 Mercedes-Benz ML350 is item # C13411.

This also has a well hidden design so you can retain the factory like appearance of your Mercedes.

It will not fit models with the Active Curve System or diesel engines.

expert reply by: Jerred H

0

Answer 1

You are correct that both the Curt Trailer Hitch Receiver #C13294 and #C13411 are confirmed to fit your 2017 Mercedes-Benz GLE43 AMG. Both hitches have a hidden crosstube meaning that only the receiver itself will be visible once installed. I do…

view full answer...

Answer 2

I attached a picture of the Curt hitch #C13411 installed on a similar Mercedes that you can show your customer to see what it looks like installed.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Trailer Hitch for a 2015 Mercedes-Benz M-Class ML350

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching