Replacement Double Eye Spring For A 2019 Grand Design 351M 5th Wheel Toyhauler
Updated 08/11/2022 | Published 08/09/2022 >
Products Featured in This Question
Question:
This is a 2019 Grand Design 351M 5th wheel toyhauler. I have a broken shackle, and the 3,500 lb. springs, for the 7,000 lb. axles are pretty flattened. I want to replace the springs with 4,000 lb. springs. The 8,000 lb. axles were an option, so the frame should be good. Be nice to do the axles too, but that will have to wait. It has the Lippert Equiflex equalizers that have badly chewed up rubber. So I would like to replace those and install wet bolts at the same time. The old springs, measured with the trailer sitting on them, are about 26 1/2inch long, eye-to-eye. But as I said they are pretty flat. The shackles are 2 1/4inch long. Im not sure what length springs I need. What is your recommendation? The wheel spacing is 35, center to center. Thank you for any help.
asked by: Howard C
Helpful Expert Reply:
The 7-Leaf Double-Eye Spring for 8,000-pound Trailer Axles # DX74XR will work for your 2019 Grand Design Toyhauler.
The springs have a sturdy steel construction and the nylon bushings are included. The spring capacity is 4,000 pounds and the axle capacity is 8,000 pounds.
The length from center of spring eye to center of spring eye is 24-7/8 inches.
The shakle straps associated with the spring are 2-5/8 inches long # 115052.
For a wet shackle bolt that you can add grease to with the fitting on the end use # 126B2. The dry version is # 166081.
I attached a review video link below.
Product Page this Question was Asked From
7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 8000 lbs
- 1-3/4 Inch Wide
- 7 Leaf
- 24-7/8 Inch Long
- Standard Grade
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Search Results: leaf spring hanger brackets
- Search Results: double eye leaf spring
- Search Results: morryde shackle kit
- Search Results: 9/16 lug nuts
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Q&A: How to Determine the Correct Leaf Springs for a 2004 Fleetwood Southwind 36E
- Q&A: Trailer Hanger Spacing and Installation for Trailer Fabrication
- Q&A: How to Determine Correct Length Leaf Spring For 7,000 lb Axle
- Q&A: Can I Use My Friends 27 inch RV Springs to Replace my 26 inch Springs on my RV
- Q&A: How to Choose the Correct Leaf Spring Length and Correct Positioning
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts
- Shop: etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles - 26" Long - Dacromet
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Video: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles Review
- Q&A: Will 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles Flex When Weight is Placed On It
- Search Results: 7000 lb leaf spring
- Q&A: Replacement for Dexter Part Numbers 072-098-00, 011-017-01, and K23-464-00/K23-465-00
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Video: All About the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles
- Video: Checking Out the SmartPlug RV/Marine Data Port Inlet


