Roof Rack Recommendation for 2009 Dodge Ram 2500 for Kayak While 5th Wheel Towing  

To add a roller to the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches #MPG907 you need the part #MAL97AR which comes with the roller and the mounting hardware to install it.

You can absolutely use all the parts you mentioned for your 2015 GMC Sierra 3500 Crew Cab in order to carry your kayak. The front-mounted hitch and Rhino-Rack T-Load Hitch Mounted Load Assist will be the perfect option for you, and you can get the…

The most budget friendly roof rack option we offer for your 2017 Ram 2500 would be the Vortex Aero rack from Rhino-Rack, which consists of: • 59 Inch Vortex Aero Crossbars, part #RRVA150B-2 • Roof Rack Feet, part #RRRLKVA • Vehicle Specific Fit Kit,…

For a single crossbar roof rack plus a hitch mounted upright crossbar the best option we have is the Rhino Rack setup that consists of part numbers #RRVA150S, #RRRLKVAH, #RTL002, and #DK427H. The Rhino Rack roof racks are a great option I recommend…

If you're wanting a roof rack on your 2003 Ford F-250/350 there will be some drilling required on any roof rack system. The Rhino Rack #Y01-120B comes with tracks which will install on your roof. Again, drilling required. Then you can use a kayak…

In order to prevent clearance issues while turning you'll want to carry the kayaks as far forward as possible. To do this you'll need to support the kayaks on a load extender over the hood using a front mount hitch. The rear of the kayaks can…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…