Will Curt Front Mounted Hitch for 2015 GMC Sierra 3500 Crew Cab Work With Rhino-Rack Load Assist

Question

Question:

I have a 2015 GMC 3500 Duramax, crew cab 4WD DRW and need to carry a 14 foot kayak, Brooklyn Model PK14. The truck pulls a fifth wheel so there is about 40 inches behind the cab, but the rest has to go on the roof and towards the front. It seems that using only a roof rack might place excessive strain on the portion of the Kayak hanging over the front, so can I use this on the roof, and then use the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar for 2 inch Hitches - 49 inch Long. Or is there a better way?

asked by: Dennis K

1

Helpful Expert Reply:

You can absolutely use all the parts you mentioned for your 2015 GMC Sierra 3500 Crew Cab in order to carry your kayak. The front-mounted hitch and Rhino-Rack T-Load Hitch Mounted Load Assist will be the perfect option for you, and you can get the T-Load with and roof rack to ensure your kayak doesn't scratch up your roof.

The exact parts you need for your '15 GMC Sierra 3500 Crew Cab are the following:

- Curt Front Mount Trailer Hitch Receiver # C31071
- Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002
- Rhino-Rack Vortex Aero Crossbar # RRVA150B
- Rhino-Rack 2500 Series Legs # RRRLKVAH
- Custom DK Fit Kit # DK415 (Only comes in pair)

To secure the kayak on the roof I recommend the Rhino-Rack Nautic Roof Kayak Carrier with Tie-Downs # RR571.

While you'll only use the rubber-padded front cradles because you'll only have one crossbar with this system, it will work perfectly to secure the front of your kayak in conjunction with the rear mount of the T-Load. The Nautic also comes with tie-downs, though if you need more you can use the Rhino-Rack Cam-Buckle Cinch Strap and Anchor Kit # RRRBAS-RTD55P-RTD45P.

expert reply by: Kyle S

1

click to enlarge

Answer 1

For your 2023 Jeep Wrangler 4xe with the Sky One Touch soft top I recommend using the Rhino-Rack Vortex roof rack. For this you will need the Crossbars #RRVA150B-2, Legs #RL210S2 and Adapters #RRVA-FK1-2. I have included an image below on how this…

view full answer...

Answer 2

Your 2018 Chevrolet Silverado 2500 HD Double Cab can be fitted with a quieter aero type of black roof rack. All options for a black aero rack for your truck appear on the linked page. These include racks that have shorter crossbars that terminate in…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Hey Stephen, if you were wanting to go with an Andersen Ultimate fifth wheel hitch best option would be the part #3220 which is designed to attach to a gooseneck ball. So then for a gooseneck ball you would want the Curt #C38CR which was designed to…

view full answer...

Answer 12

Hey, I totally get why you’re pausing here. The last thing you want is to buy the wrong parts, start drilling into that Leer cap, and end up with something that doesn’t seal or fit right. From what you’re describing, those metal pieces at the four…

view full answer...

Will Curt Front Mounted Hitch for 2015 GMC Sierra 3500 Crew Cab Work With Rhino-Rack Load Assist

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching