Trailer Hitch Receiver That Will Fit a 2013 Audi S4

Question

Question:

Wondering if this hitch will fit an Audi S4 2013 B8.5. If so I will be ordering it.

asked by: Jack L

0

Expert Reply:

The Stealth Hitches Hidden Rack Receiver # 391AUDA4A5S509 is currently the only receiver that is confirmed to fit your 2013 Audi S4. The EcoHitch # 306-X7324 is only confirmed to fit the A4 Allroad. This Stealth hitch can only be used with hitch mounted accessories. You can add the Towing Kit # 391CONVA5 down the road if you decide later you will need to tow a trailer. Or we have them available as a Set # 391AUDA4A5S5T if you would rather get it all now.

expert reply by: Bud M

0

Answer 1

Hey Aaron, with the Stealth hitch part #391AUDA4A5S5T you can only use the ball mount attachment that comes with it and there isn't any other options to change the rise/drop.

view full answer...

Answer 2

I have a solution for you, but Stealth has not confirmed the fit of the #391AUDA4A5S5T on the Avant wagons, so it's likely not going to be a good option for you. Instead you can use the Curt #C11195, which is a confirmed fit on the 2010 Audi A4…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Trailer Hitch Receiver That Will Fit a 2013 Audi S4

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching