Parts Needed To Change From Dual 20LB Propane Tanks to 30LB Tanks  

The diameter of the replacement threaded rod part #37207-30525 that you referenced is 1/2 inch in diameter and has a thread pitch of 13 threads per inch.

The #297-7RSBB-UTV ShockStrap ratchet kit you'd looked at wouldn't have enough capacity to handle the 1500 lb weight of your UTV. Two sets of the #297-9RSDB would offer a WLL (working load limit) of 2000 lbs which would be perfect for a UTV…

For securing a 1,500 lb UTV like your Ranger the ShockStrap kit you'd want is the part #297-7RSBB-UTV which includes four 1,000 lb capacity ShockStraps which was designed specifically for UTV applications and would easily have the capacity needed…

The ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers - 1-1/2" x 7' - 1,000 lbs - Qty 4 #297-7RSBB-UTV and #297-7RSBB-M are actually the exact same straps. Both of these kits include four straps, but a single strap can be purchased using…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

We've got a couple options for Air Lift kits that will a 2002 Ford E-450 chassis. Which one you need will depend on where the supply lines are ran on the frame. Both kits have a 5,000 lbs load leveling capacity. I have listed them below: Outside…