2-1/2 Hitch Extension for a 2019 Thor Omni Motorhome
Updated 07/08/2022 | Published 07/06/2022
Products Featured in This Question
Question:
I already have a 2-1/2inch receiver on my rv. What I really need is a 2-1/2inch extension to move the hitch out from under the rv. Will this part fit inside my receiver it looks to be the same size. Thanks.
asked by: Jeff
Expert Reply:
The 18" Combo Bar with 2-1/2" Trailer Hitch Receiver - Unpainted # C49511 is designed for hitch fabrication and will not fit inside your 2-1/2" receiver as it is the same side of the receiver.
We do have a Trailer Hitch Reducer and Extender # HR26 which fits your 2-1/2" receiver and will extend the hitch pin hole out 7" to a 2" receiver. Currently all of our 2-1/2" extenders are also reducing the receiver to a 2" opening. The adapter will reduce your receiver capacity by 1/3rd and gives you a maximum trailer capacity of 5,000lbs with 500lbs of tongue weight. If using a weight distribution hitch the maximum capacity of the adapter is 10,000lbs trailer weight and 1,000lbs tongue weight.
Product Page this Question was Asked From
18" Combo Bar with 2-1/2" Trailer Hitch Receiver - Unpainted
- Hitch Fabrication Parts
- Receiver Tube
- 18 Inch Long
- Raw Finish
- Fits 2-1/2 Inch Hitch
- 1/2 Inch Thick
- CURT
more information >
Continue Researching
- Search Results: rv 30amp power cord
- Search Results: camper tie~downs
- Search Results: camper leveler
- Shop: Camper Tie-Downs
- Shop: TorkLift Tie Downs - Custom Frame Mount - Front and Rear
- Search Results: hitch pins and clips
- Search Results: hitch anti~rattle
- Shop: Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Shop: Gen-Y Weld-On 2-1/2" Receiver Tube - 12" Long - Steel
- Shop: Trailer Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Video: A Closer Look at the Brophy Hitch Reducer and Extender
- Shop: TorkLift Tie Downs - Custom Frame Mount - Front and Rear
- Shop: 18" Combo Bar with 2-1/2" Trailer Hitch Receiver - Unpainted
- Video: Breaking Down the Buyers Products Weld-On Receiver Tube with 2-1/2" Hitch Receiver
- Video: Let’s Check Out the 18" Combo Bar with 2-1/2" Trailer Hitch Receiver
- Video: Breaking Down the Trailer Hitch Reducer and Extender
- Video: Review of Gen-Y Hitch Hitch Fabrication Parts - Receiver Tube - GY62HR
- Shop: Buyers Products Weld-On Receiver Tube with 2-1/2" Hitch Receiver - 12" Long - 20K
- Q&A: Hitch Extender Needed That is at Least 8 inches Long and Rated for 8,000 lbs
- Q&A: Is It Safe To Pull My 6,000lb Travel Trailer With A Trailer Hitch Reducer?
- Video: Review of Weigh Safe Trailer Hitch Lock - Hitch Receiver Locking Pin With Cap - WS54CR
- Video: Review of the Gen-Y Anti-Rattle Clamp for 2-1/2" Hitch Receivers
- Q&A: Recommended Auxiliary Tail Lights Which Can Be Attached To Thule T2 Pro XTR Bike Rack
- Search Results: rapid hitch
- Search Results: anderson hitch parts
- Q&A: 12 inch Long Hitch Tube Recommendation that has a 2 inch Opening
- Q&A: Parts Needed To Tow Trailer With Tailgate Down on 2019 Ram 2500
- Q&A: Is There A Hitch Extender For 2.5" Hitch With A 7,500lb GTW Capacity
- Q&A: Outside Hitch Base Leg Measurement for B&W Companion 5th Wheel Hitch Base # BWRVK3500
on Hitch Fabrication Parts
