Recommended Aluminum Cargo Carrier For A Travel Trailer

Question

Question:

Are there any aluminum or other totally rust-free cargo carriers for travel trailers? I hate the rust on my steel carrier after just one year.

asked by: Gerald H

0

Expert Reply:

The closest aluminum option to what you have now would be the 22-1/2x49 Curt Cargo Carrier # C18113. This cargo carrier is a hitch mounted design so you would need to either already have a hitch installed on your travel trailer or get one installed.

If you don't have one then you'll need to measure the distance between the inside of your trailer's frame rails. Once we have that measurement we can find an adjustable trailer hitch receiver to fit.

For example, the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704 will fit a frame width of 22" to 66" wide.

expert reply by: Kevin C

0

Answer 1

Hey Sara, the widest bumper the etrailer folding cargo carrier part #e99049 can fit is 4-1/2 inches. The only way it could attach to your bumper would be cut off the back of the bracket and then weld the front L of it directly to your bumper.

view full answer...

Answer 2

I do have an option for you but there isn't a spare tire holder designed to be used with the 24x60 etrailer Cargo Carrier for RV Bumper part #e99049. That said, you might be able to use something like the CE Smith Spare Tire Carrier for Trailers…

view full answer...

Answer 3

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

view full answer...

Answer 4

Hi Brian, The best option I have for you based off the axle you were looking at, e72GR, and the other info provided would be the Dexter Boat Trailer Axle - 89" long part #DX47HR. It has a 4.5" drop, 89" hub face, and the square tube is…

view full answer...

Answer 5

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

view full answer...

Answer 6

Hey Bryce, thanks for reaching out, and good question. The Mount-n-Lock Heavy-Haul’r Heavy Duty 4-inch #MNT43VR is basically the same 4" x 4" bumper as the standard 4.0, but with a stronger mounting setup. You’re not getting a bigger or…

view full answer...

Answer 7

Hello Bernie, thanks for getting in touch. The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 includes the carrier itself, the supports, bumper brackets and all necessary hardware. You can see all of the included parts in the pictures below.…

view full answer...

Answer 8

Yes, the Curt Trailer Hitch Receiver item #13358 does fit the 2022 Mercedes-Benz Sprinter 2500 with the factory step bumper. This hitch is custom fit and bolts to your Mercedes with included hardware. We have not heard of any issues with the rear…

view full answer...

Answer 9

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Recommended Aluminum Cargo Carrier For A Travel Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching